Some Help W/ Locknut

[hondafreestyler]

I tryed getting my stock axle lock-nut off ... no luck ...

I did a search on here but didn't find what I was looking for ...

Do I loosen the nut closest to the brake hub first? ... or the one father away? ...

If facing back of the quad push down right?
Any trick to getting this damn thing off?

[busch light]

you have it right, it is just a b!tch to get started, try spraying a little penetrating oil on the threads and the 2 nuts, let it set and use a big pipe wrench, maybe a cheater bar if you have to

[mustang93]

heat it with a torch mine was stuck on with locktite, the torch helps a lot;)

[beak7707]

They are reverse threads also, so make sure you are going the right way. You will defiantly need a big pipe wrench!

[250rider]

and it might not slide off right away after u take the ring off, sometimes it still gets stuck so use a file to file down around where the ring was, if that dont work persuade it with a hammer. if not a bigger hammer

[hondafreestyler]

allright thanks guys ill try that ...

and also ... my quad has all wheels and **** off ... its on the jack ...

i had my buddy hold the back brake ... and I was pushing soo hard that the axle turned and like there was this grinding noise? ...

is that bad or not? ... I didn't know so I just stopped then

[hondafreestyler]

I got it!!! ... lol