Walsh A-arm balljoint question

[mxracer47]

Hello,

Just curious if anyone knows if the houser long travel lower ball joints will fit on an old style walsh long travel a-arm. They appear to be the same. The ball joints are the push in type that are held in with a large C-clip on the walsh arms. Nate replied to me by e-mail that they don't carry the old style ball joints anymore.Trying to find an equivelant part to fit.

Thanks, Rich

[honda92]

i know this post is from 2004, but alteast i searched right? anyhow i have this same problem going on and i would like to know if anyone has an easy solution before i try to fit another type or style balljoint in there. i called walsh and they told me to get a tie rod ends off of a old VW car (which he figured an auto parts store would have a hard time getting) and cut the threaded shaft off and then turn it down in a lathe. which i am capable off with no problem it's just that something else out there has got to fit. thanks guys

[250xjohn]

Real old post aha but there is not much on this topic. Anything new?