FCR carb problems

[H_W]

I have a 39mm FCR carb on my 400 and I love it. But I have a problem, when I rev the motor I can hear air being sucked in through the intake. So, I took the carb off and the tube that attaches to the intake on the motor is loose. I don't mean it's loose from the motor, its loose from the carb. The tube will spin around. I know it isn't suppose to be that way. The tube that attaches to the air box doesn't do this. Is there a way to fix this or do I need a new carb. Thanks in advance.

[H_W]

Well, I feel like an idiot. I think you can just tighten the tube up by turning it to the right until it is tight. I will try it a post the results.

[H_W]

Problem solved.

[hondarider2006]

Good job;)

[montyjcm]

I am glad we could help you.:D

J/k, I wouldn't have a clue what to check for.;)

[H_W]

Originally posted by montyjcm
I am glad we could help you.:D

J/k, I wouldn't have a clue what to check for.;)

Yea, I don't know what I would have done without your help. J/K

I felt pretty stupid after I figured it out.

[Dunesurfer]

You put gas in it under the cap on the top:eek2: