Mini front rim question

[jst]

I was told that the front pattern for my 2003 Viper 90 is the same as a 1987 250x,now what I need to know is what offset do I need?I would like to make it wider.

[ROBBSRACING]

You would want to use a 2X4 offset wheel. If you are using the stock 8 inch front tires you would order an 8x6 wheel with a 2x4 offset. The 2 represents the width of the inside half of the wheel and the 4 is the width of the outside half. Hope this helps!

[QuadJunkies]

Originally posted by ROBBSRACING
You would want to use a 2X4 offset wheel. If you are using the stock 8 inch front tires you would order an 8x6 wheel with a 2x4 offset. The 2 represents the width of the inside half of the wheel and the 4 is the width of the outside half. Hope this helps! this iswhat We have done also....;) you cant beleive the difference a 2/4 offset makes for stabiity.. Robb correct me if Im wrong, but isnt the Eton Viper a honda bolt Pattern all the way around????Seems like thats what I ordered for my Boy.....
Tina

[Elduner]

This is something I picked up from www.miniatv.com


This is a work in progress please add your knowledge as needed.

Kasea Skyhawk 90
4 x 110 front but has square hub not round.(modify)
4 x 100 rear

Eton Viper 90
4 x 110 front
4 x 110 rear

Predator/Sportsman/Scrambler 90/50
4 x 110 front
4 x 110 rear

OLD SCHOOL Suzuki LT50 (w/Out suspension)
3x90 front
3x90 rear

Suzuki Lta 50/ Kawasaki Kfx 50 02-04
3x100 front
3x100 rear

LT80 87-03/kfx80 03
3X120 front
3X120 rear

Raptor/Badger 80
4 x 88 front
3 x 90 rear

Honda TRX 70 86-87
4x110 front
3/100 rear

TRX90 93-02
4 x 85
4 x 85

Xtreme Tantrum 50,90,100, Pro100
4 x 110 front
4 x 110 rear

LEM
3 X 100- with AC hubs only. (front and rear)
4 x 85- with Robb Racing hubs (front and rear)

Dinli, DRR, Jehm
4 x 110 front
4 x 110 rear

Arctic Cat
4 x 115 front
4 x 115 rear

[QuadJunkies]

Originally posted by quad_rider
This is something I picked up from www.miniatv.com


This is a work in progress please add your knowledge as needed.

Kasea Skyhawk 90
4 x 110 front but has square hub not round.(modify)
4 x 100 rear

Eton Viper 90
4 x 110 front
4 x 110 rear

Predator/Sportsman/Scrambler 90/50
4 x 110 front
4 x 110 rear

OLD SCHOOL Suzuki LT50 (w/Out suspension)
3x90 front
3x90 rear

Suzuki Lta 50/ Kawasaki Kfx 50 02-04
3x100 front
3x100 rear

LT80 87-03/kfx80 03
3X120 front
3X120 rear

Raptor/Badger 80
4 x 88 front
3 x 90 rear

Honda TRX 70 86-87
4x110 front
3/100 rear

TRX90 93-02
4 x 85
4 x 85

Xtreme Tantrum 50,90,100, Pro100
4 x 110 front
4 x 110 rear

LEM
3 X 100- with AC hubs only. (front and rear)
4 x 85- with Robb Racing hubs (front and rear)

Dinli, DRR, Jehm
4 x 110 front
4 x 110 rear

Arctic Cat
4 x 115 front
4 x 115 rear Thanks for posting all those!!! I thought thats what the bolt pattern was ;) its nice casue I can swit ch tires with my kids if needed....:D

[markvette]

the 87 honda 250x rim is a 10 inch rim. that is the one we use to run the 19x6x10 holeshot mx tires on the front of a mini.

[QuadJunkies]

We run a 10 inch rim as well

[Pappy]

quick question....


running a 2/4 offset front with a 3/5 offset rear, will the width be close or will the front be too narrow?

[markvette]

the front would be too narrow. on a mini quad you want the front 1 inch wider than the rear for it to steer right.

Mark

[QuadJunkies]

Originally posted by markvette
the front would be too narrow. on a mini quad you want the front 1 inch wider than the rear for it to steer right.

Mark ;)

[Pappy]

ok so ill prolly have to run 2 inch wheel spacers in the front. thanks:)

[Pappy]

scratch the wheel spacers, i ordered +2 a arms:macho

[QuadJunkies]

Originally posted by Pappy
scratch the wheel spacers, i ordered +2 a arms:macho :eek2: .....