PDA

View Full Version : Elkas and housers forsale



kicker696
03-09-2004, 09:38 AM
I have a set of houser a-arms with red powdercoat bottems and silver tops +2+1, all the ball joints are good, the powder on the left lower i believe has about a 1 inch long scratch other than that they are fine. Need tie rods. These are for a 400ex, but will work on a 250r with some spacers. 300 obo

I also have a set of Elka compression adjustable tripple rate, SSD, remote ressie shocks for either a 400ex or 250r. They are set up for a 190lbs rider on +2s on a 250r and it is about the same for the 400ex 700 obo

i will sell them together for 950 shipped if anyone is interested please let me know

Fubar
03-09-2004, 10:14 AM
could i see some pics of the a arms?

WhiteBros400ex
03-09-2004, 11:22 AM
Trade for a 02 blaster that has brand new top end and new turf tammers on the back. plus the mods in my sig maybe.

kicker696
03-09-2004, 11:23 AM
does the blaster run if so you got a deal

WhiteBros400ex
03-09-2004, 11:53 AM
Brand new top end, about mayb 30 min to a hour on the new top end. and bottom end was all went over and cleaned and new rear turfs, where are you located at.

kicker696
03-09-2004, 12:08 PM
i live in green bay wisconsin, so it would be a trip, but we could work somthing out, maybe like half and half for shipping?

WhiteBros400ex
03-09-2004, 12:43 PM
k. ill talk to my dad bout what we can do and get back to you today btw do you have ne pics of the arms and shocks let me know thanks.

steveatv3
03-09-2004, 01:20 PM
Hey,

Are the a-arms long travel? or standard? Can you plz send me pics of the arms to steveatv3@netzero.net how are the ball joints and the bushings?

would u take 250shipped?

kicker696
03-09-2004, 09:16 PM
300 shipped is the best i will do



http://www.imagestation.com/picture/sraid106/pfc80731a860f6dfd1482e8dfc57a4569/f96cb61e.jpg


[IMG]http://www.imagestation.com/picture...30/f96cb620.jpg

DangerousDean
03-09-2004, 10:14 PM
the a-arms, the +2 means 2" wider? and 1" means 1" forward right ?
How does this set up handle?

and how much owuld tie rods be to make them work ?

kicker696
03-10-2004, 07:38 AM
yes, the +2 is wider, and the +1 is forward. This set up works great, it is what most of the racers run on all the bikes, i run a +3+1 just because it is long travel, and then run 4+1 rims to counter act it.