BANJO Bolt HELP ASAP PLEASE

[EXerHonda400]

Hi thankyou for looking. I am going to be putting a brake light on my 400EX. And I am going to be useing a Banjo bolt with a pressure switch built into it. But i am not certain about the size but i do have a good idea. I plan to buy it off of ebay cuase they have the sizes on there but i am using this site http://www.fourstrokesonly.com/BrakeSwitches.html as a reference to the one i need. I think i need part number 44-0077 but if some one could confirm that for me it would be greatly appreciated.
THANK YOU

[muff]

I was just going to check the size for you but it appears I have left all of my banjo bolts in the calipers that are now at pappys

however I do believe that this is the correct size "10X1.25 mm" because 1.00mm is quite a finer thread that isnt used on the larger size bolts

[JOEX]

I just thew the package away the other day, I knew I should have kept it:( I'm 99% sure that is the right one and C&D Racing might have a better price than that;) :)

Joe

[EXerHonda400]

Alright thanx, a second opinion gives me a little more confidence. Thank you

[Streamline]

Yes the correct bolt for a Honda 400EX is 10 x 1.25mm. FYI- All Yamaha & Honda's use 10x1.25mm and all Suzuki and Kawasaki's use 10 x 1.00mm bolts. Hope this helps

Thanks,

Brian
Streamline Performance Braking
www.streamlinebrakes.com

[EXerHonda400]

it sure does, thanks a bunch