What clutch to buy

[Racerjoey1]

I think I need a new clutch and cable. The lever has a very stiff pull and you can feel the cable dragging inside the rubber. Also, it slips a little in 4th and 5th. Do I have to repalce the basket and pressure plate or just the clutch plates themselves?

Thanks,
Joey

[Dave400ex]

Take the clutch apart and look at the basket and pressure plate. They might be fine. I just had mine done, and he said all the other stuff looked good, and just put in the Sparks 8 plate setup. I also picked up just a new stock Honda cable.

first buy a new cable...if it still does has problems then buy the tusk clutch kit with springs from rocky mountain atv

8 Plate kit...:cool:

[Colby@C&DRacing]

Replace the cable first. Then look into the sparks 8plate it is a great clutch kit.:)

[hondarider2006]

Originally posted by Rico
8 Plate kit...:cool:

How much does this clutch kit run for??

[hondarider2006]

Originally posted by Rico
8 Plate kit...:cool:

How much does this clutch kit run for??

my names joey and urz is too some ima give u some good advice. Get a cable first its only about 10-15 bux. u'll get a new one anyway if u get a clutch kit. Now if it still sucks get the 8 plate clutch kit like rico posted it will get all of ur power to the ground and if u upgrade the motor ur still good. But before u buy a clutch kit take ur fibers and plates out and skuff the plates up on some concrete and se if that helps.

[Dave400ex]

The Sparks 8 Plate will run you $120 I believe it was from C&D!

[cals400ex]

Originally posted by Rico
8 Plate kit...:cool:


sweet, i didn't know i could get a hinson basket, timing chain, and sparks clutch for $140. :p

just kidding. i still need the basket. i already have the clutch and timing chain.