350x swingarm

[TRX_Thumper]

Hey will a stock 350x swingarm fit on my 300ex? I want something slightly longer but still able to use my carrier and shock. It is 1 inch longer right?

["BLAHH"300!!]

.....you need to make some sort of spacer's becouse the 350x swinger is a little narrower....i'm not too sure of all the details....but it is +1....

[tprender]

Afew years ago I put a 350X swingarm on my 250X. You will need everything from the rear end of the 350; axle, bearing carrier, brake rotor,shock, etc. I used about 7 flat 1/2 in washers to take up the space on the swingarm bolt. Make sure that you get the chain lined up good or the chain will come off every time that you make a jump. The only other problem is the top shock mount. You will need to make a spacer to go inside the bolt hole on the top of the shock. Putting the swingarm will make the X handle much better, because the stock swingarm is to short.

Hey, we posted the same thing at the same time.
I erased mine........

Chris
AMA District 23 Racer #66
2002 Laeger's/Pro Fab/Custom AXIS 365X
QuadSport MX, Quad 250A MX, Quad 250A XC
See ya at the races...

[TRX_Thumper]

Well I dont want to do it if I cant use my carrier and rear end. Thanks