renthal bars

[bman13]

My buddy finally got his four fiddy r this morning. He bought Renthal bars and twist throttle. He was wondering, where did you guys relocate your key and temp light as well as adding a tether? I know you can just junk the key, but he kinda wants to keep it on there somewhere.

[Sportrax10]

I was thinking that maybe on the right side (transmission side with kick start). You could mount it to the botton fender mount... Maybe...

[rafalnos]

yeah that would look sick if you were to put it by the kick start in the fender. But then it might get in the way....

[Sportrax10]

I mean the front fender...

[bigz-71]

i bought a handle bar clamp that allows you to relocate the key on it and it also has a place for the prodesign kill switch. you look at my pics (jeremy's R). i have a pic of it. TMM makes the piece. it ran 50 bucks. it gives you a place to mount the key and kill switch.

[bman13]

Does TMM have a website? What does TMM stand for?

[bman13]

anybody ??

[brif]

Tom Miller Motorsports, they advertise in atv sport alot.

[bigz-71]

Originally posted by bman13
Does TMM have a website? What does TMM stand for? i am not sure if they have a website. i can give there number and you can call them. their number is 731-986-0893. tell them jeremy boaz sent you. they are supper nice. you will not have any trouble dealing with them.

[bman13]

anybody that put theirs in the plastic somewhere? or maybe made a little bracket and fastened it to the frame or handlebar clamp?

[chad502ex]

I have a set of 400ex Renthal bend on my 450R and was able to keep the stock plastic key holder/light underneath the crossbar pad. To keep the plastic holder in place I drilled the bottom of the holder (where the gas tank breather hose pushes thru to the steering stem) and used a tie strap and tied the holder down to the steering stem. You can't even see the tie strap unless you rubber-neck and look up from the ground. You might have to loosen the crossbar an bit a raise a little to accomadate the plastic key holder underneath.

hope this helps

chad502ex.com

[robman]

Just make a plate out of aluminum or plastic,drill the required holes and attach it to the handlebar clamp.It's easy.

[4fiddyR]

I put mine in the hood. :D

[mephyst]

Originally posted by bman13
anybody that put theirs in the plastic somewhere? or maybe made a little bracket and fastened it to the frame or handlebar clamp?

Yup.. check out mine. I bought renthals the first 2 hours I got the quad and encountered that problem. I have a pic of it.. but I don't know how to post it on this message board system. =(

[mephyst]

Hey, btw where can I find a twist throttle for the 450 right now? I am dying for one.. I took it out yesterday to Dumont and it's extremely uncomfortable for me.

[Power Stroker]

Go to www.roxspeedfx.com they make an aluminum dash panel for the 450R and handle bar risers. They are really sweet.

[bigz-71]

if anyone is interested i have that handle bar clamp for sale. i put tag handlebars on my 450r so i had to get ride of my bar clamp. its in good condition. it has a place for the key and pro design kill switch. i will post a pic of it. email me if you are interested.

i also have the rental bars as well. they are jimmy button bend.

[bigz-71]

here are the pics

http://www.imagestation.com/picture/sraid114/p8e18d68fee232cf0d9440a9487c6ad09/f8d661f2.jpg

http://www.imagestation.com/picture/sraid114/p5d2bf513b136ab44ba141edab3b6a41a/f8d663ae.jpg

and the handlebars

http://www.imagestation.com/picture/sraid114/p60921bffe9fc6f31c02c2e07c52d5f36/f8d66290.jpg

email me if interested jboaz@bellsouth.net.