Trade full race mustang for quad!!!!!!!!

[jrspawn]

Hey, i have a 1988 notchback that has a full 10 point professionally installed roll cage, welded in subframes, welded in coil over cross bar, rear coil over suspension, 90/10 struts, drag springs, weld wheels,fuel cell, mallory fuel pump, filter, and regulator, all 1/2" pushlock fuel line, 8.8 with 3.73 gear, line lock, msd, racing buckets, and a bunch of other extras. I also have a tremec trans, with blowproof bell and pro 5.0 shifter, in brand new condition. i also have a built 306. It is fresh with 0 run time, still on the stand. It have trick flow tfs heads, with fresh 5 angle job, and porting done by jersey cylinder head, custom cam, pistons, rockers, canton pan, ported victor jr intake. email me with any quesitons or offers at jrspawn@aol.com
im looking for a fully setup motocross quad.

thank you
justin
jrspawn@aol.com

[jrspawn]

bump

[Atreyu]

You've got a PM.

[rodenberg35]

do you have any pics? If so send to rodenberg35@hotmail.com

[jrspawn]

hey, for pics of the rolling chasis go to www.msnusers.com/88mustang its the white coupe.

thank you

justin
jrspawn@aol.com

[jrspawn]

bump

[SadisticShee]

If the stang was all together it would be nice. Thats a lot of work to get that beast running. Been there, Done that

[jrspawn]

Hey, not really much work at all, 2 hours if that, its all there except for some very minor things, its a race setup, so everythin is very easy to install and remove. there's about 14,000 worth of stuff with car, so its well worth it for someone interested in mustangs.

justin
jrspawn@aol.com

[jrspawn]

bump

[jrspawn]

ttt

[jrspawn]

bump