Trade full race mustang for quad!!!!!!!

[jrspawn]

Hey, i have a 1988 notchback that has a full 10 point professionally installed roll cage, welded in subframes, welded in coil over cross bar, rear coil over suspension, 90/10 struts, drag springs, weld wheels,fuel cell, mallory fuel pump, filter, and regulator, all 1/2" pushlock fuel line, 8.8 with 3.73 gear, line lock, msd, racing buckets, and a bunch of other extras. I also have a tremec trans, with blowproof bell and pro 5.0 shifter, in brand new condition. i also have a built 306. It is fresh with 0 run time, still on the stand. It have trick flow tfs heads, with fresh 5 angle job, and porting done by jersey cylinder head, custom cam, pistons, rockers, canton pan, ported victor jr intake. email me with any quesitons or offers at jrspawn@aol.com
Im looking to trade for a fully setup motocross quad.

thank you
justin
jrspawn@aol.com

[jrspawn]

bump

[jrspawn]

bump

[jrspawn]

pics of mustang at www.msnusres.com/88mustang its the white coupe

justin
jrspawn@aol.com

[jrspawn]

sorry, posted the link wrong, its accually www.msnusers.com/88mustang

justin
jrspawn@aol.com

[SnellCRP]

Is the car complete, turnkey? I know its a 88' and they are fuel injected, but is yours still mass air injected or speed density or is it carbed? Thanks.

[jrspawn]

Hey, the car is not turn key right now, the rolling chasis is complete, and the 306 is still on the engine stand with 0 run time, right from jersey cylinder head, and the tremec trans is also out of the car, bassically it just needs the engine and trnas to be dropped in. If your familiar at all with mustangs, you will know this is a very serious setup, and i have a LOT of money into it, right now it is setup to carberated, but i have other fuel injected intakes that are ported i would throw in with it.

justin
jrspawn@aol.com

[jrspawn]

bump

[jrspawn]

bump

[jrspawn]

ttt

[jrspawn]

bump

[jrspawn]

bump