Who sells +1 clutch cables???

[AAAirbooorn]

I need to extend my clutch about an inch or two to accomadate larger handlebars. Thanks

[lil400exman]

you should have enough adjustment/excess cable not to need to get a longer cable. If you need to go to the auto parts store and have them make you one............and if ya want to get really krazy get them in stainless steel:cool:

[AAAirbooorn]

Nah, it aint working. I'd also need to get longer housing too. Turn the wheel to the left and it wants to rip the cable off.

[Mikey]

Try www.motionpro.com. They should have something. I have the same problem with +1 stem and Tag fat bars.

[AAAirbooorn]

I talked to the guys at C&D Racing today and they said they get alot of calls about short cables and are going to do some tests with cables from other bikes. But they didn't say when they would have results.

[AAAirbooorn]

I went with Motion Pro. They are gonna custom build me one. If it fits,I'll have them make me a backup. Thanks guys!!

[AAAirbooorn]

Originally posted by Mikey
Try www.motionpro.com. They should have something. I have the same problem with +1 stem and Tag fat bars.


You'd probably need about 4 inches to do that setup, right?? I had Motion Pro give me an extra 3 just for the handlebar upgrade.
I hope it's not gonna be too much.

[Mikey]

I can still ride it right now. I think two inches would be ok for me.
It was long enough with the stock cables, fat bar adapter and CR high bend bars.

[AAAirbooorn]

I heard that maybe Honda has been shortening cables lately to save money in the long run. Who knows............What year is yours?

[pnut420]

We had that problem with my brothers +1 stem and HMF, but the Magura clutch he got came with plenty of slack :cool:

[chad cavagnaro]

i am having the same dilema[spelling?] im orderng 1 inch
steering stem, gpr stab, and some kind of new bars?, this should raise up about 2 1/2 inches so icalled motion pro and got a twist throttle and custom cable, i went with 2 1/2 extended cable. good luck let know how it turns out..

[chad cavagnaro]

Originally posted by pnut420
We had that problem with my brothers +1 stem and HMF, but the Magura clutch he got came with plenty of slack :cool:

im thinking of going with magura hyd clutch also, what kind of diff. did his make? how does he like it? i had a gasgas w/ hyd clutch it was awsome till it was 40 deg or below, it would be in gear, let out the clutch and be still engaged?? id be like "what the hell!!!"

[jonc623]

i have used the hyd clutch set up on the 250r i built and it is real trick no more worrying about cables getting stiff half way through a xc race and the pull is the same all day long