Plastic repair

[sled_ed 300ex]

I have broken fender and i dont know what to do.I tried to put little holes and a peice of wire but it looks like cr*p*:confused: !!!!!!?????

[mustang93]

try this :D

http://www.exriders.com/vbb/showthread.php?s=&threadid=90196

http://www.exriders.com/vbb/attachment.php?s=&postid=940429

[300exPat]

If its in the front you might just want to shave them, itd look alot better

but if its in back the only working things ive seen is a piece of aluminum underneath holding them together + holes with zip ties

[sled_ed 300ex]

they are shaved but broken on the side part.theres a long crack almost up to the next piece that hooks on them.the back i will trie the plate of metal and the zip ties.thanks,appreciate it. :D

[Rdhanded2]

If it is just a crack you can take an old straight screwdriver, and heat it with a torch until it is ALMOST glowing hot. Then, touch it to the back side of the plastic along the crack and make small circular moves. This will melt it back together. Don't hold the heat in one area long though or it will melt through. That has worked for me in the past.

[mustang]

Originally posted by mustang93
try this :D

http://www.exriders.com/vbb/showthread.php?s=&threadid=90196

http://www.exriders.com/vbb/attachment.php?s=&postid=940429

thats my favorite topic:p

[stupid driver]

Originally posted by mustang
thats my favorite topic:p

whether he was drunk or stoned when he decided to do that, i still have not figured out