PDA

View Full Version : bent frame


03-03-2002, 08:37 AM
Yesterday I went to croom and hit a tree with my
2002 yellow 300ex, and my frame got bent. Dose
any one know what I can do to fix it, or any place
that I can look for any aftermarket frame.
trx400ex
03-03-2002, 10:35 AM
check with service honda for a stock frame
mrusk
03-03-2002, 11:20 AM
If it isnt that noticeable when riding,i would keep riding with it. Your best bet is to buy a used frame tho. The 250x frame is the same as the 300ex. Call East Coast Atv for a used one.

matt
03-03-2002, 06:07 PM
My dad called honda about a new frame and it is going to cost
$1,200. He is going to call around and see if any can straighten
my frame, if not we will go ahead a buy a new one. Dose any
one know who will sell frames for less.
mrusk
03-03-2002, 06:48 PM
840 from service honda!

matt
Dave400ex
03-03-2002, 10:14 PM
How much does a Stock 400EX Frame Cost?
exriderdude
03-04-2002, 12:56 PM
east coast atv has used frames for $600
Scott
03-04-2002, 01:02 PM
Warriorman: a 400EX frame is a llot cheaper. 400s are built in the US, 300s are assembled in Japan. Just about every part on a 300 costs more than a 400. Lok at the plastic, factory plastic for a 300 is $515 from Honda. 400 plastic from Honda is about $250.
Dave400ex
03-04-2002, 01:55 PM
I was just Wondering. If I ever Break or Crack my Frame I would just buy a New Stock one and have it Welded On. I would have it made really strong. Then I could Powdercoat it too.
400exRacerX
03-04-2002, 02:24 PM
If you buy a 250x frame then you will have to make your own custom battery mounts.
"BLAHH"300!!
03-04-2002, 04:22 PM
.....build you an aluminum air box and put your battery and wire's and all that in side it...:D....i'm about to do that....