speedy400
02-20-2004, 02:40 PM
I was wondering what jetting should I start with on an FCR carb that I will have shortly? My elevation is at 200 feet, its about 32 degrees out. my motor mods are JE416 piston,mild porting/polishing, powerpomb header, HMF slip on, Hotcam stg2, Uni filter, aluminum airbox(no lid), before with my stocker carb my jetting was-
dynojet 170ish main depending on temp and such.(never really got it dialed in)
3 1/2 turns out
45 pilot
dynojet needle at 3rd clip from top with washer under the clip
thanks-darren
dynojet 170ish main depending on temp and such.(never really got it dialed in)
3 1/2 turns out
45 pilot
dynojet needle at 3rd clip from top with washer under the clip
thanks-darren