WTB 250X/300EX hubs, carrier, etc

[xlr810]

Looking for a few 250X/300EX parts, stock or aftermarket is okay: Rear bearing carrier with good bearings, needle bearings and bushings for swingarm pivot, steering stem bearing and seals, rubber grommets and special washers for gas tank mounting, and a good CDI for 250X.

Thanks!

[01_300ex]

I have a pretty much brand new clutch cable= $10+shipping
Rear hubs(splines on one are startint to strip)= $20 for both+shipping

[xlr810]

Thanks for your reply on the hubs and cable. Do you have any pics of the hub with stripped splines?

I'm also looking for a 350X kicker and CDI.

[01_300ex]

I also have a 350x kickstarter and CDI. $30 for kickstarter, and $35 for CDI.

[xlr810]

Seems I'm on a roll with you.

I'm interested in all you have listed so far.

How about a wiring harness for 350X-- or does the 250X harness do the job?

Do you happen to have any of the rubber grommets for the seat or gas tank on 250X/300ex? Or 250X swingarm pivot bearings, collars, etc, or bearing carrier?

Thanks,

dmisek1@excite.com

[01_300ex]

I dont have the gas tank grommets. And are you talking about the 4 seat grommets, two in the middle, and two in the rear(close to grab bar).

[Tlongs400]

if the hubs don't work out with 01 let me know i have some in almost new shape

[01_300ex]

I have a 350x wiring harness for $30+shipping. I dont have any swingarm stuff, except for the long swingarm bolt.

[xlr810]

Yeah. Those are the rubber grommets I'm talking about.

What is included in the wiring harness? Does it still have leads for headlights, killswitch, etc.

And is that rear hub still useable?

Thanks,
Dave

[xlr810]

I went ahead and got the hubs from 01_300ex. I'll keep you in mind if they don't work for me. Thanks for the reply.

Dave