T-9 Baja wheel & Razor2's

[simoniz]

2 questions for everybody. I just mounted my Razor2's on the T-9 Baja wheels. First off, has anybody had any problems with the valve stems. There isn't much room between the race rings. Also, what kind of air presure do you GNCC guys run???

[Sportrax10]

Originally posted by simoniz
2 questions for everybody. I just mounted my Razor2's on the T-9 Baja wheels. First off, has anybody had any problems with the valve stems. There isn't much room between the race rings. Also, what kind of air presure do you GNCC guys run???
Is this the ITP .190?

My friend (Whirebros400ex) had these rims with razors mounted on them... It didnt take long before they bent... Then riding on a bent rim took out his bearings and carrior...:eek2:

[Out_Sider]

isnt the baja wheel the one with the race rings? if so, then yea, the valve stem is a lil hard to reach, but i would run about 7-9 psi in the front and 5-7 in the rear....just me, im sure some ppl run different than that.....but when i trail ride that is the air pressure i run

[simoniz]

yea these are the ITP's.

[cdalejef]

5 psi front and rear is the norm for GNCC

i run 4.5 psi in my rear & 3.5 psi in my fronts :eek2:

[Silverfox@C&DRacing]

The reason for the hard to get to valve stem is because of the 4+1 offset, my burgard 4+1 beadlock are tough to get to I wanted the little chrome piece on the valve core but that did not happen because I could not flex the valve core to put air in the tire :macho

[simoniz]

Thanks for the info. on the air presure. I was just curious to see if anyone was having problems with the valve stems.

Thanks

[JOEX]

Would 90* valve stems work?

Joe

[Silverfox@C&DRacing]

I don't think the 90 would stick out far enough. I might try a 60 degree valve stem :)

[TrX450rKiD]

simoniz: What size Razr 2's and Baja's did you use? That is the exact set-up I want when I get the 450R this summer!

[TrX450rKiD]

???

[Silverfox@C&DRacing]

Hope you don't mind simoniz

He got the 22x7x10 Razr 2 on 10x5 4+1 baja

[simoniz]

Sorry I didn't get back to you sooner. Thanks C&D.

I ran the Razor2's this past weekend. They are a awesome setup especially if it's muddy. I thought I was riding a Ute lol...