stripped stud

[riverex]

I was changing tire on the back and i stripped out one of the lug nuts and studs what is the easieast way to replace the stud and how much are the studs

[Greg Z]

Best is to take off your whole hub and then back the stud off with a hammer once it is out go to service honda and order a 250r stud for the hub (they dont sell 400ex studs just the whole hub ) then once you get it in hammer the stud into the hub :)

It works because... I did it:blah:

[Aceman]

Originally posted by Greg Z
then once you get it in hammer the stud into the hub :)



What I usually do is put the new stud through the hub, put a couple washers over it, then screw the lug nut on it and pull it through the hole. There is also less chance the stud will start crooked. :D