god this is frusterating

[cabex]

OK ive been trying to bleed my brakes for what seems like forever now. and i cant get them to work. its so frusterating. Ive done everything that ive found how to do on here. and the brakes are still not working, and are really easy to pull in. what could be goin on. :confused:

any tips or suggestions?

[Tommy 17]

is there any pressure on the brake at all???


u probably have a air lock... leave the bleeder screw open and the cap off for awhile... the fluid should flow down...

[cabex]

yeah there was no pressure at all. it was like pulling the brake in when it had no fluid in it at all

[mustang93]

air locks are a pain in the arss sometimes it takes forever to blead atv breaks:mad:

[JDiablo]

do it jabber style http://www.exriders.com/vbb/showthread.php?s=&threadid=9577

[416mx]

Go to autozone and buy a vacuum pump, about 25.00, thats the only way to bleed brakes on a atv.:D

[Glamis400ex]

open the bleeder nut and attach 1/4 inch peice of clear hose to the nipple and suck it down. Make sure it's clear of you'll get a mouthful.


Glamis

[cabex]

i tryed the methode where i put a hose on a sheringe and filled it up with fluid, and connected the other end of the hose to the bleeder valve,. and pumped the fluid into it till it started filling the master cyinder. and they still didnt work?