sneaky
02-12-2004, 07:46 PM
1987 Tecate 4 wheeler with Maxxis Razr's front and rear on douglas .190 aluminum wheels, New maier rear plastic, front plastic in very good shape, motor was just rebuilt by Dennis Bently replacing all the bearings, piston, rings, along with everything else in the entire motor (top & bottom), new clutch, clutch cable, clutch lever,new brakes and all new bearings through out the entire bike like swing arm and all. Everything that could be replaced was. This is a very tight atv with somewhere around 10 to 12 hours since rebuild. It was built back with the stock cylinder sleeve and piston from Kawasaki. The only things after market are the tires and wheels, and the FMF silencer.These atv's where only made for 2 years, so it's rare to see one in this shape, a must see for someone that wants one of these atv's that was the fastest production 2 stroke 250's at the time there were made.
I am posting this tecate for a friend and I can honestly say it's a very strong runner, and still very tight. I know I am leaving some things out, so if you have questions, please ask and I will answer them or get back with him about more details. He is asking 3100.00 for this sharp 87 Tecate......The atv is located in Ellenwood, Georgia...
I am posting this tecate for a friend and I can honestly say it's a very strong runner, and still very tight. I know I am leaving some things out, so if you have questions, please ask and I will answer them or get back with him about more details. He is asking 3100.00 for this sharp 87 Tecate......The atv is located in Ellenwood, Georgia...