View Full Version : 250r parts
JDiablo
02-10-2004, 03:52 PM
let me know if anybody has any 250r parts
JDiablo
02-10-2004, 06:01 PM
bump,and i mean anything stock/aftermarket!1
JDiablo
02-10-2004, 08:44 PM
bump,i dont care i need all parts....i know someone has to have something:(
TRX250R87
02-10-2004, 08:49 PM
What do you need? I have a stator cover, linkage, steering stem, all rotors, 2 cylinders, a few new pistons, 2 pipes...
ERIC
JDiablo
02-10-2004, 08:50 PM
is that all you have,list EVERYTHING that you will sell
seven
02-10-2004, 10:09 PM
I have a set of JD peformance +2+1 with new tie rods and new powder coat job with steel braided brake lines for 350$.
smooth
02-11-2004, 05:30 AM
i hvae a whole bike lonestar frame and roll a-arms jp swingarm yellow fullbore and new tires for 4000 for the whole bike i might part it out
JDiablo
02-11-2004, 05:48 AM
hey smooth let me know if you will part it out ill take alot of parts off of you,and seven u got a PM
briantrx
02-11-2004, 11:10 AM
i have a brand new in the box, stock bearing carrier.
let me know if interested
I have an 86-87 seat base ,no foam or cover, 1 cylinder, 2 boxes full of tranny gears and washers and such. Also the alum. cover for the bumper for an 86-87, stock tool box, caliper holder, rotor hub, basically a scattering of odds and ends parts.
shogun_98
02-11-2004, 01:00 PM
I have an 87 Bottom end needs crank rebuilt, sidecase has small crack by clutch rod but is fixed and lower case saver mount is broke. $250
JDiablo
02-11-2004, 01:26 PM
now im just really gathering up the small parts first
i need
spindles/with hubs
rear hubs
rear caliper
front caliper
rear bearing carrier
rear brake rotors
front brake rotors
the whole electrical system
Pappy
02-11-2004, 05:58 PM
i have a set of 250r rear hubs with extended wheel studs installed. they are glassbeaded and ready for powdercoat/painting. $50 and the spilnes are perfect:cool:
yamasaki_125
02-11-2004, 07:51 PM
check your PM's
beak7707
02-11-2004, 08:11 PM
Hey man your mailbox is full again!!
JDiablo
02-12-2004, 05:52 AM
Originally posted by beak7707
Hey man your mailbox is full again!!
omg again:grr: ,and pappy ill take them hubs!!!:devil:
shogun_98
02-12-2004, 08:15 AM
hey i was wondering if you wanted the carb and rear motor mount still. Let me know Thanks Jonathan
Pappy
02-12-2004, 08:22 AM
Originally posted by 300exrida
omg again:grr: ,and pappy ill take them hubs!!!:devil:
dont forget to empty your SENT messages
pm me and i will send you info for payment or my paypal addy whatever works best for you. what color do you want them?
JDiablo
02-12-2004, 01:10 PM
ya shogun i still want them PM me with all of your info again i dleted it by accident,and pappy u got a PM
JDiablo
02-12-2004, 01:23 PM
im going to put this on hold right now,i mean you can still post stuff for sale but if you don't mind waiting then ill take them from you,but for now i have to get money orders for the people that i said i will buy from..i just don't want to get in front of myself here
briantrx
02-12-2004, 02:03 PM
let me know if you are interested in the bearing carrier. i do have pictures i can post.
patrick delao
02-12-2004, 03:37 PM
I have OEM axle,front shocks,foot pegs.
delaos1@msn.com
Pat
JDiablo
02-12-2004, 05:34 PM
how much for the footpegs?
JDiablo
02-12-2004, 07:23 PM
bump....still looking for calipers for front and back...and spindles in good condition
patrick delao
02-13-2004, 06:54 AM
$30 shipped
Narly R
02-13-2004, 11:41 AM
Everything in my sig.;)
JDiablo
02-13-2004, 01:16 PM
narly r ill take some stuff off of you
XC250R
02-17-2004, 10:29 AM
88R parts
I still have front calipers, spindles, rotors, and front lonestar hubs. Sell them all to you for $350.
I also have complete electrical system for sale. All only 1 year old. Harness was spliced to put on kill switch and Ricky Stator lights. Includes everything except CDI and stator. $125
JDiablo
02-17-2004, 11:17 AM
how much for just the spindles?
310Rduner
02-18-2004, 02:26 AM
I have an 86 airbox, good condition just a small split in bottom that is still pushed together tight.. just needs small jb weld.
Entire Snorkel Assembly
Fmf Turbine cor 2, polished and freshly packed, ding on bottom from bottoming out once.
1/4 reed spacers (4 total)
Left foot peg in good condition
Stock Carbeurator, Good condition w/throttle cable and cap.
Perfect condition rear taillight assembly
Bills pipe
Stock waterpump cover, perfect condition
Email me at chester902010@sbcglobal.net If interested.
Originally posted by 300exrida
let me know if anybody has any 250r parts
Stock 87, trx250r pipe no dents no rust great shape. 40.00 shipped.
JDiablo
02-18-2004, 07:13 PM
im taking it easy for awhile now until i get everyone paid off that i need to get paid off,otherwise ill be on backorder for money orders to people and they will get pist off..so ill get back to you
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.