Air/Fuel Screw

[InsAyneROostin]

How do you tell how big a turn is? I mean I never got what a turn exactly is. I might sound retarded but it's not so. So could anyone tell me what a full turn is? how many revolutions it is or whatever? Anyhelp would be greatly appreciated. Thanks alot guys.:confused: :confused: :confused:

[InsAyneROostin]

I mean the measure on a full turn so I can figure out how far to turn it for a 1/4 turn..thanks again in advance.

[phebus]

A full turn is a 360* revolution. People get confused with the screw slot. Just turn the screw so the slot comes around to the same position it was, that is 1/2 turn. Do it again, and you have 1 full turn.

[JOEX]

I'll try to explain it...

(*= degrees)

1/4 turn = 90*
1/2 turn = 180*
3/4 turn - 270*
1 full turn = 360*

Think of a clock,....
Noon = 0*
12:15 = 90* = 1/4 turn
12:30 = 180* = 1/2 turn
12:45 = 270* = 3/4 turn
Back to the 12:00 position = 360*

Did that make sense?:p

Joe

[InsAyneROostin]

Thanks alot you guys! I was so confused about the whole thing...Well thanks for all the help. Keep on ridin!