PDA

View Full Version : looking for a post



trouble661
02-08-2004, 06:38 AM
I recently saw a post on here that had detail step by step procedure and pictures on changing jets on a 400ex. i did a search and could not find it. if someone would post the link to it, it would be greatly appreciated. also i have read that there is a WB movie floating around this site that shows how to change jets. i couldnt find that either.

Quadfather
02-08-2004, 07:49 AM
Remove the bolt on the very bottom of the carb. I believe it is 17mm. You will then see a very small brass bolt. That is actually your jet. I believe that is 6 mm. It couldn't be easier.

cals400ex
02-08-2004, 12:41 PM
check this out:


http://www.exriders.com/vbb/showthread.php?threadid=19832

cheetah
02-08-2004, 12:51 PM
rico also had one in the faq section. it was about changing to a 42 pilot jet but its all the same steps.

ZSK
02-08-2004, 12:54 PM
Follow these steps and it's almost idiot proof. Works great for the 300ex too.