PDA

View Full Version : 1/2 this answered in FAQ other part i have ?


lil400exman
02-07-2004, 09:39 PM
in mounting up the kill switch (teather type) would i splice into the black wire with the white stripe on it? this is for a 250R by the way and i figured they spliced into the same looking wire on the 400 that had a yellow stripe instead. couldsome help me as i have never done this on a R............:confused:
lil400exman
02-08-2004, 05:08 PM
someone has gotta know!:(
KASCHAK
02-08-2004, 05:23 PM
ok
i just did this yesterday.. on the side of the quad behind the left front shock. there is a pug. with all wires comming out of it.. one of tem is solid green.. might have black spots on it.. its thats one.. and the black with the white stripes. ill see if i can get a pic to show you. im 90% possitive that its the green one.
KASCHAK
02-08-2004, 05:35 PM
if you want the stock slider to still work you gotta put a loop. from the hot in. so that the hot ou....... uh oh i forgot how i did it.. ill go out tomarrow ant take a look at it. im sure somone else can help you... are you using a GUNNER teather?
lil400exman
02-08-2004, 05:48 PM
Originally posted by KASCHAK
if you want the stock slider to still work you gotta put a loop. from the hot in. so that the hot ou....... uh oh i forgot how i did it.. ill go out tomarrow ant take a look at it. im sure somone else can help you... are you using a GUNNER teather?
thanks man i have did it on a EX before but not on the R :(
lil400exman
02-08-2004, 07:49 PM
DANGET SOMEONE PLZ HELP!:(