PDA

View Full Version : 250r stem on a 400?


steveatv3
02-03-2004, 07:45 PM
does it work......whats the difference?
jdpdave
02-11-2004, 07:58 PM
won't work. the 250 has more throw. the inside wheel will over center.
Jnine
02-12-2004, 10:31 PM
Won't work guys for 3 big reasons.

Different length.

Tie rod plates mounted differently.

The big one... The steering stops are on opposite sides. However, this assumes that you actually want to steer the quad and not just go in a straight line like a drag racer. If that is the case, just weld the d*&n thing in solid.

Good luck!
lil400exman
02-13-2004, 12:27 PM
Originally posted by Jnine
Won't work guys for 3 big reasons.

Different length.

Tie rod plates mounted differently.

The big one... The steering stops are on opposite sides. However, this assumes that you actually want to steer the quad and not just go in a straight line like a drag racer. If that is the case, just weld the d*&n thing in solid.

Good luck!
this is why Arens machines always go faster...........they go in a straight line everywhere............by the way john this is pj........;)