PDA

View Full Version : clutch levers


dannyboy20
02-01-2004, 09:10 PM
i want to do new bars so i also want replace the old brake and clutch lever. Whats the best brand to go with ?
RiPPiNiTuP7
02-01-2004, 10:58 PM
RTC is the only way to go:macho
racerx573
02-01-2004, 11:48 PM
Originally posted by RiPPiNiTuP7
RTC is the only way to go:macho

What he said^^
dannyboy20
02-02-2004, 10:00 AM
were can i find these ? and what do they usually go for
NacsMXer
02-02-2004, 10:34 AM
ASV all the way!! Never had experience with them till i bought one of their C/5 series unbreakable brake levers. Build quality is top notch with the lever being made out of billet aluminum. All hardware is stainless steel too. The lever simply bends forward and springs back. It even has an adjustable reach with the simple turn of a nut. Why buy another lever that just may bend again? Im thinking about buying one of their unbreakable clutch levers for my Magura Hydro clutch to complement the other one as well.
02-02-2004, 10:45 AM
Originally posted by RiPPiNiTuP7
RTC is the only way to go:macho


yuuuuup
dannyboy20
02-02-2004, 11:09 AM
were can i find RTC
dannyboy20
02-02-2004, 11:12 AM
i was also wondering about the stock perch. It has 2 wires on it im guessing it for the clutch to be engaged to start. Do the aftermarket perch's have these ?
NacsMXer
02-02-2004, 11:33 AM
Those two wires were hooked up to a switch built into the stock clutch lever and perch. When you buy a new lever, simply tie these two wires together and tape it up. Like you thought, it will disable the start with the clutch in feature, meaning the quad will jump forward if you have it in gear and push the starter button without the clutch engaged. Just remember this and you'll be fine.
Paul400ex2002
02-02-2004, 11:53 AM
rtc is the only way to go. Call Rudy @ DFR at 480-664-9860 and he'll set you up with whatever you need