250r case assembley

[rider129]

I had to replace the crank and now Icant get the case haves back together. is there any tricks or links you can lead me to.

[sandspanker]

:confused: hoe are you trying to put them together? did you put the bearings in the cases or did you put them on the crank first? they need to be in the cases to do this easy, make sure everything is lined up , trans gears shift forkes ect., slide the cases together as far as they will go . they make tools for the next step but if you are like me you have to use the case half bolts put them in and start snugging them up in a circle SLOWLY AND EVENLY!!!!!!! This is how i do it works for me GOOD LUCK, Let me know how it works.:macho ;) :p

[rider129]

I put the bearings in the case first. Nacs racing said to put the clutch side on second so that you can line up the shiftrod ect. that is the trick nacs told me.