300ex/400ex a arms

[trx300exrida]

Yeah i have a 300ex and i want to buy stock 400ex shocks and a arms and put them on my 300 for better shocks and wider a arms. Is this possible? Will I have problems?

[redrunner]

Do
a
search.


:D

[ridesa02400EX]

try posting this in the right forum you will get way more replies

[Dupontster]

My brother put 400ex a-arms and shocks on his 250x. But it wasn't that good. It was very stiff. So he called works shocks and they got him a pair and it rode great...I would call works..

[trx300exrida]

how mcuh did he pay for works shocks and was the ride hight higher than stock 300ex?

[redrunner]

:eek2:

[Dupontster]

He paid $340 for the shocks I think.The ride height was higher than stock but it worked real good.

[trx300exrida]

does anyone else have an imput? i wanna do this so if you could all help thanks

[HRC300]

you can put the shocks & a-arms on but i would suggest a kit to raise the top shock mount. This will kepp the ride height similar to stock and allow the shocks to work properly without a harsh ride

[300exOH]

I have Works shocks the correct length(14.75") and 87 250r a arms(Adjustable camber). No shockmount needed. Let me know if you're interested.

The best way to do it is using 400ex stock length shocks with 300ex aftermarket or stock a arms and a shock mount bracket. Try a search. There's a lot of good info on this.

[xcracer416]

If you want the kit I have three for sale never been on a quad, i will sell for 60 dollars plus s&h. If you would like it I will sell it, 2" drop. Email me at everetteeugene01@hotmail.com. the kit works on 250r,400ex,300ex,250x. It may also work on some other models too. i even thimk it will work on my new 450R! I have 3 kits avalible.

[Out_Sider]

i wouldnt do it, just buy +2 arms made for a 300ex...i hear the bumpsteer is wicked bad on that conversion!

[Out_Sider]

copied from search"The 300ex's stem bushing is farther forward in the frame, that is were you pick up the extra bumpsteer. The tie-rods angle back which makes for poop handling. I've never rode one but I'll take bradleys and Jeff's advice it doesn't look too good. Cheaper than buying a complete new front end if your on a budget but you might wanna get a stabilizer to help out the bumpsteer.."

http://www.mustangmods.com/data/3205/bad.jpg

[Out_Sider]

bumpity :p