Post a pic of your shop

[la400ex]

I think there was a thread like this a long time ago. I searched it and didnt find anything. Here is mine. Nothin special but i like it.

http://www.slupowerlifting.com/250r.jpg

[Big400EX]

Thats a cool shop, im sure it gets the job done. As long as you got space and tools then your set.

[la400ex]

thanks man. Yea, it gets the job done. Im slowly but surely getting it fully stocked with tools. I just bought that bench grinder on the counter the other day. You can see my swinger by it that I have started to polish. Its a lot easier with the big buffing wheels on the grinder.

[K_Fulk]

One side of the garage. That I do most of my work in the other side has a bunch of stuff in it. Need to do a bunch of spring cleaning on the other side once spring starts

[simoniz]

I'll keep dreaming of having a nice garage to work on my quads.

[400exr]

We have a pretty big shop with a section just for our quads, but it's so messy right now that I don't know if I should post it!:blah:

[Chanman420q]

i dont have one, but were building one in the spring. its gunna be 12x10. Its basicly the same size as our shed, just 2 feet smaller. Its gunna be sweet. i just need this snow to go away!!

[GoOn3]

check mine out:
http://www.imagestation.com/picture/sraid101/pa6553046e8edb5335daeed28743b8ef9/f9d07ef8.jpg http://www.imagestation.com/picture/sraid101/p9636b99f74fe9019945679d937f5ba4e/f9d07ee1.jpg

[lil400exman]

Originally posted by GoOn3
check mine out:
http://www.imagestation.com/picture/sraid101/pa6553046e8edb5335daeed28743b8ef9/f9d07ef8.jpg http://www.imagestation.com/picture/sraid101/p9636b99f74fe9019945679d937f5ba4e/f9d07ee1.jpg
so do u throw a ramp down and ride the quads down via that? nice setup! and shes clean............i think she is cleaner than a kitchen!:eek2:

[TRX250X]

My dad's putting up a new barn with a shop building in one end. The whole thing is 136' x 66' x 18' to the eves. They were supposed to start pouring concrete this week on the shop part, which is 60' x 66'. That'll be nice once it gets done. It's big so we can get the semi's and the combine in ok. There should be plenty of space for quad and sled parking and maintenance.:D

I don't have pics yet, but when I get some, I'll post them.

[300exOH]

Best pic I have. The kids are ready to ride! I built the garage myself with help from a couple other people. I think it turned out nice. It's 24'x32' and it has plenty of room for my blazer, monte, 3 quads and lots of tools

[300exOH]

where the quads live

[ReconRider25]

my half of the garage.(dad gets the other part lol) old pic. has lots more tools in it now and truck restoration is alot further along. also in process of putting wood burning stove in corner. :)

http://www.freewebs.com/67stout/102-0231_IMG.JPG

[spincr4hire]

mine's a f-in mess right now...:grr:

[crap-banshee32]

some pics of my garage....nothing fancy..but it gets the job done

http://www.imagestation.com/picture/sraid101/pb0715b590a66e7737e0518f97758e869/f9cf8a87.jpg

[crap-banshee32]

http://www.imagestation.com/picture/sraid101/pc68518b958f9e510fb13a5839f5a7bbc/f9cf8a80.jpg


http://www.imagestation.com/picture/sraid101/p311365d69ef80ef616c0e56f442a8d44/f9cf8a7d.jpg

[crap-banshee32]

http://www.imagestation.com/picture/sraid101/pf3f93a20c9cedbbdd6450a69e6a9016b/f9cf8a7a.jpg

http://www.imagestation.com/picture/sraid101/pda8674f0c4c3e20f8a43c0d382480b40/f9cf8a77.jpg

[crap-banshee32]

and in the winter....i come inside and plop a board on top of the fooseball(sp) table and work inside instead:)

http://www.imagestation.com/picture/sraid101/p67b5692ec4eb14798e742300c410c5ee/f9cf8a72.jpg

[Moded86R]

I put my qauds in my basement.I also have a garage.But it's for the cars.


It's dark and I can never get pics down there to turn out right.It's got enough room for my buddies 400ex.My 400,300,and 250r.A 69 camaro on a rotissery.

[derekhonda]

http://www.angelfire.com/jazz/400ex/spedo_011.jpg

my new workshop is in the proccess of being built.

[brian-250]

Originally posted by derekhonda
http://www.angelfire.com/jazz/400ex/spedo_011.jpg

my new workshop is in the proccess of being built.

ive seen that quad before:confused: dont know where:huh

[Bad Habit]

Originally posted by derekhonda
http://www.angelfire.com/jazz/400ex/spedo_011.jpg

my new workshop is in the proccess of being built.

Engineered floor joists and laminated main beam. No squeaky squeaky when you come home late from the bar. You are a smart man.:cool:

[derekhonda]

you know your stuff yellow 416, and brian, no you havnt :rolleyes:

[danney f]

Originally posted by crap-banshee32
and in the winter....i come inside and plop a board on top of the fooseball(sp) table and work inside instead:)

http://www.imagestation.com/picture/sraid101/p67b5692ec4eb14798e742300c410c5ee/f9cf8a72.jpg

crap-banshee32
How do you like that pipe bender? Is it the 12 or 16 ton? Looking to buy one, most likely the 16 since it can bend 3" pipe.

[Sportrax10]

Originally posted by Moded86R
I put my qauds in my basement.I also have a garage.But it's for the cars.


It's dark and I can never get pics down there to turn out right.It's got enough room for my buddies 400ex.My 400,300,and 250r.A 69 camaro on a rotissery.

My basement is my shop too! Its awesome cause its always warm, and I can never run out of room...:macho

Ill get pics when I clean it up a bit...

[crap-banshee32]

Originally posted by danney f
crap-banshee32
How do you like that pipe bender? Is it the 12 or 16 ton? Looking to buy one, most likely the 16 since it can bend 3" pipe.

thats the 12 ton...from harbor freight...it works great...gets the job done real nice.:)

Nick

[brian-250]

Originally posted by derekhonda
you know your stuff yellow 416, and brian, no you havnt :rolleyes:

yes i have,dont tell ME what i have and have not seen!:macho :D

[250xridamatt]

my garage consists of one area that fits 1 car plus all the tools u can imagine, 1 part that will hold about 12 cars, and a carpeted show room for the nice cars that are done being restored. my dad is big into hudsons and american motors. also if any of you get the cars and parts magazine, a couple months ago my dad's hudson italia was on the cover. ill get a picture of it up on the forums sometime.

matt

[roostin_dale]

Ohh man..we have a garage, a 20x20 shed in the back yard, and an enclosed trailer. My dad gets tools real cheap form where he works so we have a crapload of them everywhere...we have to run form one to the other to find the right tool.:grr:

In the spring summer the quads stay in the shed(it has built in heaters but we dont trust to leave them on all the time:o ) so in the winter they stay in the warm garage... i will find some pics sometime

[KASCHAK]

i wish i had a garage to work in.. but i dont.

[250xridamatt]

ive got a few pictures that i just took. the car is a 1955 hudson italia that i own part of. If u have any questions about other cars just ask.

http://www.imagestation.com/picture/sraid102/p1ce3d32f15023b5e43e5eb38a572d91f/f9ca6883.jpg.thumb.jpg this is the work section.



http://www.imagestation.com/picture/sraid102/p6356da8e73143eac74b04d04f3008f65/f9ca687b.jpg.thumb.jpg my brothers car in the main storage area

http://www.imagestation.com/picture/sraid102/pd5f5510d0ef11cb42d3d608c8dd63bbe/f9ca6879.jpg.thumb.jpg
show room

http://www.imagestation.com/picture/sraid102/p401608096e980ccbd90158e1ec7a3cd5/f9ca6878.jpg.thumb.jpg my families car.

http://www.imagestation.com/picture/sraid102/p88ab85be2808541f64458afdd565129e/f9ca6881.jpg.thumb.jpg and another one of the work shop. sorry i don't know how to make them bigger