LT a arms for 250r or 400ex

[Pappy]

these a arms are the ones bill ballance runs...infact he won 3 gncc's on this set. they are designed for use with 19 inch LT shocks. they are sold as is, in good working condition but need re painted. $500 firm. price them new if you think thats too high;) designed by AXIS and they offer incredible ground clearence for XC racing. bushings and ball joints appear to be in good condition also. will come with tie rods.

[Pappy]

they are +1

[Geoff Casper]

are they for 400ex or 250r and are they +1 or stock length

[Pappy]

i was told the are set up for a 400ex. it has 400ex spindles and with the aluminum frame i really cant tell. i have a few 400 frames here so i will do some measuring. they are +1

[Geoff Casper]

if they are for a 400ex I will probly take them.let me know or send me your phone #.e-mail is (ghost1@socket.net) thanks

[Pappy]

geoff,

the a arms measure 25 cm outside to outside and 14.6 cm inside to inside. this includes the bushings. i thought i had a 400 frame but they are all suki's and yfz's:p

if you could measure your frame at the a arm mounts maybe you could tell.

[Geoff Casper]

i went and measured 400 ex.inside is 16 1/2 and outside is 25 1/2
also measured my 250 protrax and it is 15 1/2 inside and 26 outside.not sure what you have there but am still interested if you find that they are 400ex.thanks

[Pappy]

geoff i will try and clarify what they will fit:p im usually not this moronic but being that this is an aluminum frame i cant say what the hell they have done. i doubt this pic will help, but i measured basically the a arm dimensions. the aluminum frame has such tight clearences the measurement of the mounts on it may not match anything:p

[Geoff Casper]

Yeh i know its hard to figure out. I'm not sure anymore what fits what.If you find that they work for me let me know.Hey,what about that WER steering stabelizer i see in the picture. do you still have it.

[Pappy]

ok, the arms will only fit a R. the way they are built wont allow modifacation for 400ex use.