MY idea for my blaster!

[trailboss250]

$150 For Front maxxis pro's on .190s
$170 For Graydon nerfs
$389 RPM axle
$569 Diamon racing +2, +1
$150 +4 Snorris
$500 TCS front shocks
$200 for R shock
$1395 CT 240 Sonic Complete Package
(Kit includes cylinder, head, piston, rings, wrist pin, circlips, top-end gasket set, reed cage, intake boot, 36mm PWK pre-jetted carburetor, CT Pipe and silencer.)
so How does this list look?
I but my suspention/chassis mods first, Then i would get the CT package..
So do you think it would be "XC" ready? Any tips/tricks will be apprisiated. Thanks:D

[Cole Trane]

Sounds and looks like you'd be well on your way, GOOD LUCK!!

:rolleyes: wut he said

[eastside 400]

$500 TCS shocks!?!? where are they at, everywhere ive seen is 750

[trailboss250]

Originally posted by eastside 400
$500 TCS shocks!?!? where are they at, everywhere ive seen is 750
It doesnt have any rezzies or anything but over at Bluetraxx A guy names BansheeBC can get them shipped to my door for $500!

[400EX_Kid_03]

$3523.... sounds like you need to get a damn good job, or save it, sell your blaster, and use both of the money to buy somthing worth doing that too... say a 400EX or somthing

[Cole Trane]

Maybe he likes his blaster. Did you see the one they did an article on in atv sport a couple months ago holy chit!! I agree with ya in a way, a blaster may not be the best quad to use, but if he's comfortable, then its all you trailboss.

[Glow Plug]

what width would +2 a arms put you at on a blaster? Because you don't really want to go much wide than 46 inches (or around that) But for that price couldn't you buy a 400ex?

[Greg Z]

if you want to XC i reccomend getting a 400ex or Z400

Im over on bluetraxx to

newjacksm ;) you probbably seen me post couple times, But a Blaster with that much money IMO might be a waste thats a lot of money to spend on a quad when on a Z400 or 400ex you can put a nice 416 Kit in it with some port and polish cams pipe suspention tires and some rims. you will be set. 400ex's go for very cheap now adays. I got mine for 2800 in great conditions some flaws. fixed them up now its perfect. the motor never had a problem just some screws and bolts.

but if your going to stick with the blaster

yeah it sounds good good luck with all that money! but in XC man its all about rider! look at harlen. he was pretty much on a stock Z and i think he came second or third over all and first in his class

[trailboss250]

The thing is I want the FASTEST blaster! I dont want a 400 and be the slowest. I want to be the only person with an XC blaster. I have never heard of one, how about you? Also i love the fealing of blasters. Its not to big or small. And putting +2 aarms on my blaster would make it about 43.9 inches.

[400EX_Kid_03]

Originally posted by trailboss250
The thing is I want the FASTEST blaster! I dont want a 400 and be the slowest. I want to be the only person with an XC blaster. I have never heard of one, how about you? Also i love the fealing of blasters. Its not to big or small. And putting +2 aarms on my blaster would make it about 43.9 inches.

well if thats the case, the hell yeah, u go for it... good luck!

[trailboss250]

Originally posted by 400EX_Kid_03
well if thats the case, the hell yeah, u go for it... good luck!
Thank you :cool:

[Cole Trane]

Kick @$$ and take names homie!!

[lil400exman]

a 240 blaster would be hard to keep cool in the woods if you dont keep her moving. You might wanna add a fan to the electrical system to keep er kool and a XC blaster would be great! also think about investing in a larger gas tank and a oil block off kit!:macho

[trailboss250]

Originally posted by lil400exman
a 240 blaster would be hard to keep cool in the woods if you dont keep her moving. You might wanna add a fan to the electrical system to keep er kool and a XC blaster would be great! also think about investing in a larger gas tank and a oil block off kit!:macho
well i dont really want to spend over 3500...

[Sportrax10]

A oil injector b/o kit IMO is a must... they can get a problem quite easy mess up the motor...

Have you considered Burgard a-arms, I think there a little cheaper and good quality...

Good luck with the Blaster...

[trailboss250]

thanks.. How much do Burgard run? Also i think i will also be getting front/rear breaks. So The whole blaster project may cost about $4500

[ZBlaster]

Originally posted by lil400exman
a 240 blaster would be hard to keep cool in the woods if you dont keep her moving. macho

mine stays as cool as a stocker... i was originally worried about it overheating and have never had a problem... i do alot of long trail rides.

[Sportrax10]

$450 I believe...

[la400ex]

Yea...i paid 450 for mine....and got them powdercoated for that same price.