PDA

View Full Version : What wheel off-set


daiglea
01-19-2004, 10:10 AM
I got +2 a-arms and +4 in axle. What kind of wheel offset whould you guys recomend for the front.
Cole Trane
01-19-2004, 10:27 AM
Go with 3-2 offset.
RiPPiNiTuP7
01-19-2004, 11:02 AM
3:2.
cdalejef
01-19-2004, 11:08 AM
3+2 for mx
member
01-19-2004, 11:18 AM
ok ive got +3 arms on my 400 so do i need to run 4-1 rims to stay within the 50" limit... and do i need a wider axle.. ive still got stock:confused: :confused:
cdalejef
01-19-2004, 11:24 AM
Ya, 4+1 wheels and either a RPM or LSR adjustable axle. It will be unstable and tend to swap around in the rear with the stocker. :eek2:
RiPPiNiTuP7
01-19-2004, 11:24 AM
Originally posted by member
ok ive got +3 arms on my 400 so do i need to run 4-1 rims to stay within the 50" limit... and do i need a wider axle.. ive still got stock:confused: :confused:

yes, get 4:1 rims. i would suggest a wider axle to go along with the a arms.
daiglea
01-19-2004, 11:25 AM
I got a +4 rpm and +2 houser and you all recommenc 3:2.
RiPPiNiTuP7
01-19-2004, 11:26 AM
Originally posted by daiglea
I got a +4 rpm and +2 houser and you all recommenc 3:2.

ya.
motoboy66
01-19-2004, 10:51 PM
i would go with 4-1. I have 2-3 ITP Baja's, and they are almost an inch further out from the stockers. I noticed it when i had one of each on. The 3-2's are right over the caliper, and the stock are like 7/8 inside of it. I wish I knew this befor I bought the 3-2, I would have gone 4-1.


Todd
01-20-2004, 05:21 AM
my 2/3 bend the tierods pretty easy & I have to be an inch more careful on both sides when im iding the trails...theyaren't that great of a improvement stability wise..but they look cool :blah:
YZROOSTINYA
01-20-2004, 07:05 AM
the stockers are 4: 1.5

if you have 3:2 you are about 1 inch over on each side. after markets are 5 inches wide, not 5.5 like the stockers
01-20-2004, 02:37 PM
Originally posted by YZROOSTINYA
markets are 5 inches wide, not 5.5 like the stockers aftermarket what? rims or a-arms?
fasterz
01-20-2004, 02:53 PM
i have a +3 LT front end, can i run stock rims? or should i just spend the $$ and get the 4:1's?
cdalejef
01-20-2004, 02:58 PM
Originally posted by fasterz
i have a +3 LT front end, can i run stock rims? or should i just spend the $$ and get the 4:1's? You can run them, just not in AMA events.