I am a retard

[WEEZIL]

So we are getting a whole crap load of snow. And my moms quad (the plow bike)s battery died. SO i am standing on the footpeg pulling it. All of the sudden it locks up and I slip and fall on top of the fender. Being that it is cold out the fender is brittle and it cracks. I feel awful this suzuki is in such nice shape and i Fu--ed it all up! So i wanted to know if there is some type of glue i could apply that works well for mending cracked fenders
Thanks

Signed
The idiot!
Oh and if it helps matters any by the type of plastic used the quad is a 98 suzuki quadrunner 4WD

drill holes on each side of the crack...then ziptie them tightly....if you do not do this the crack will spread & you will be in a mess...theres is no glue for this either...buy some new fenders if you really care about looks ;)

[Pappy]

chit happens:p

[hondafox440]

You can heat each side of the crack up and try to melt the plastic together, but just frankenstein stitching it with zip ties will work better and be easier.

[daimon1054]

http://www.urethanesupply.com/storeatv.html

[3rdtimescharm]

Yep you can weld it, I have but you have to be good and slow at it to make it look good again..

[WEEZIL]

wow. that plastic weld looks bad arse
its just a matter of me getting it asap so i can fix the fender before it cracks worse. Excellent product It can be used again and again. Hell The dash in my car is cracked. mabe i can fix it,;)

[ghak99]

I have seen that done to a few utility quads in the past. It is a cheap fix when the looks are not the most important thing about the quad.

Good luck!

[racer87]

if you want it to look good use duct tape that fixes everything:devil: