harebounder
01-15-2004, 07:21 PM
01 400ex
I am going to try and list from the top to the bottom with this machine. I am taking serious offers on this machine will take off parts to lower costs to suit buyers needs.
T2 bars
chrome houser +1 steering stem
hand guards
magura hydralic clutch
lonestar stainless front lines
lonestar stainless rear
block off plate
dg nerfs with peg extenders
white brothers e series slip on
k@n filter with outerwears
Elka triple rate zps comp. with extra set of stiffer main spring and many different spacers
bandit xc on douglas .190 with outside reinforcement rings
dg front bumper
7-way denton stabilizer
Maier plastic skid frame
Dg rear skid
Razors on back .190 douglas rim
Elka dual spring remote res. zps with a stiffer main spring and many spacers
Tppered bearing carrier with outside grease zerk
Axle lock nut
2 sets of stock front rims
1 set of .160 front rims
2 sets of stock rear rims
1 set of .160 rears rims offset
1 set of razors for rear
1 set of razors for front
2 sets of stock front tires and 1 set of stock rears
all stock stuff
I have some other stuff laying around i know. Like spare tie rods tie rod ends Have a set of stock bearing carrier seals and bearings all in the packages.
The motor is stock start instantly doesn't smoke very nice machine for the money with the parts that are on it. Have most of the receipts or the directions for the parts plus honda service book. I am asking 6,500 for everything. Serious buyers only if i don't sell it i am just going to race it next year. I f i forgot any of the parts i have on the machine i will update the thread.
__________________
I am going to try and list from the top to the bottom with this machine. I am taking serious offers on this machine will take off parts to lower costs to suit buyers needs.
T2 bars
chrome houser +1 steering stem
hand guards
magura hydralic clutch
lonestar stainless front lines
lonestar stainless rear
block off plate
dg nerfs with peg extenders
white brothers e series slip on
k@n filter with outerwears
Elka triple rate zps comp. with extra set of stiffer main spring and many different spacers
bandit xc on douglas .190 with outside reinforcement rings
dg front bumper
7-way denton stabilizer
Maier plastic skid frame
Dg rear skid
Razors on back .190 douglas rim
Elka dual spring remote res. zps with a stiffer main spring and many spacers
Tppered bearing carrier with outside grease zerk
Axle lock nut
2 sets of stock front rims
1 set of .160 front rims
2 sets of stock rear rims
1 set of .160 rears rims offset
1 set of razors for rear
1 set of razors for front
2 sets of stock front tires and 1 set of stock rears
all stock stuff
I have some other stuff laying around i know. Like spare tie rods tie rod ends Have a set of stock bearing carrier seals and bearings all in the packages.
The motor is stock start instantly doesn't smoke very nice machine for the money with the parts that are on it. Have most of the receipts or the directions for the parts plus honda service book. I am asking 6,500 for everything. Serious buyers only if i don't sell it i am just going to race it next year. I f i forgot any of the parts i have on the machine i will update the thread.
__________________