WANTED 250R parts stock or aftermarket!!!!

[RobRacing]

Some 86 R parts I am going to need. Shoot me some prices if you have any of these parts.

A-arms stock length (stock or aftermarket)
Left side case with bearings and balancer holder.
Swingarm (stock or aftermarket)
bearing carrier (stock or aftermarket)
Steering stem (stock or aftermarket)
tie rods with ends
Headstay (stock or aftermarket)
Rear motor mount (part that goes inbetween swingarm)


Let me know on any of these parts.

Rob

[smooth]

i have a-arms with new bearings and new yellow powdercoat for 125 shipped

lsr carrier like new for 75

swingarm with yellow powder coat 75 all prices are shipped

[RobRacing]

Are the a-arms and swingarm stock or aftermarket? Brands? Any pics of these items.

[smooth]

send me your e-mail and i'll send you pics they are stock

[RobRacing]

RobRacing@comcast.net

[ghak99]

I have a set of stock a arms in great shape and new bushings. Are you taking off aftermarket? If so I would make a good deal in a trade. If not I can get pictures.

PM me if enterested.

[shogun_98]

I have an 87 bottom end the crank is seized but other than that it is in good shape. Lower case saver bolt is cracked. Make me an offer if ya want it.

[RobRacing]

I don't need the whole bottom end. Just the left case. How about $80.00 shipped for the case.

[briantrx]

I have a brand new in the box, factory honda bearing carrier.
let me know if interested

brian

[RobRacing]

How much the carrier.

[briantrx]

Originally posted by RobRacing
How much the carrier.

$55 - that includes shipping. I will email you pictures right now. Let me know if interested.


Thanks


Brian

[Narly R]

I have stock arms and tie rods, but not ends. They are all in GREAT condition, but i need to do some work on the threads on the arms, but they should be fine, they arnt that bad, and its just a couple. Make an offer, I might be able to get some pics soon....:o

[RobRacing]

If you can get me some pics I'll make an offer. Send them to RobRacing@comcast.net

[Tom TRX250R]

Rob,
I have a stock steering stem in great shape and is straight, tie rods with ends-straight in great shape with good threads, and I possibly have the rear motor mount too. Email me at Tom250R454Ltd@hotmail.com for prices. Thanks. Tom

[smith]

Rob, I have:

Stock 86 swingarm with rear motor mount - $55
bearing carrier - $30

email me if interested at: andrew.smith@core.com

[RobRacing]

How much for just the motor mount

[Matt Wright]

stock stem $40.00 matthon500@aol.com

[MX#9]

I have the rear mount for an 86-87 that bolts to the back of the motor for the swing arm pivot. $40.00 plus shipping.

[RobRacing]

Still need lots of R parts. Some 400ex stuff will work also, like the brakes, spindles, hubs etc. Let me know what u got.

[Tom TRX250R]

Rob,
Email me at Tom250R454Ltd@hotmail.com I have a lot of parts you need including spindles, hubs, etc. Let me know asap. Thanks. Tom

[patrick delao]

I have a complete back end off a 1986 TRX 250R

swing
carrier
axle
hubs
hubs for sprocket and sprocket
hub for rotor and rotor
rear caliper
all still together

$225 shipped or make offer

Pat delaos1@msn.com

[RobRacing]

If you are willing to seperate the parts let me know with prices.

Rob

[patrick delao]

Sure what part were you looking for??

[RobRacing]

Just give me prices on whatever you have.

[patrick delao]

That list above has my parts list make offer on what you need!




Pat