fast250x
01-04-2004, 12:06 PM
88 Paul turner 250r motor in 250x frame with 250x motor
the motor runs and stuff but is missing an ac regulator in the wiring, the motor is mounted in the frame right now, with all the mounts in place, it has good strong welds to the frame, the radiator is not mounted tho and your going to need a 250r air box and snorkle but, but you could make one out of sheet metal here is a list of mods
the 250r motor- Bored to a 270 with new cylinder and paul tuner powerhead, the bottom end was rebuilt last year with new crank and chrome stator cover, the carb is bored out to a 38mm with curtis sparks reed cage and carbon fiber reeds, it a duncan shifter too, ct pipe with paul tuner silencer.
the 250x motor- bored to a 275 runs good but needs a countershaft
the 250x-black maier plastics, itp .190 rims with fast treckers, progressive front shocks, new but stock a arms, renthal bars, twist throttle, dg alloy nerf bars, 3.2 gallon clarke gas tank, and some other stuff
the motor runs and stuff but is missing an ac regulator in the wiring, the motor is mounted in the frame right now, with all the mounts in place, it has good strong welds to the frame, the radiator is not mounted tho and your going to need a 250r air box and snorkle but, but you could make one out of sheet metal here is a list of mods
the 250r motor- Bored to a 270 with new cylinder and paul tuner powerhead, the bottom end was rebuilt last year with new crank and chrome stator cover, the carb is bored out to a 38mm with curtis sparks reed cage and carbon fiber reeds, it a duncan shifter too, ct pipe with paul tuner silencer.
the 250x motor- bored to a 275 runs good but needs a countershaft
the 250x-black maier plastics, itp .190 rims with fast treckers, progressive front shocks, new but stock a arms, renthal bars, twist throttle, dg alloy nerf bars, 3.2 gallon clarke gas tank, and some other stuff