alright guys help me out

[adrenaline]

i just got dyno jet kit...what would be the proper jetting for 0 elevation to say 2000 feet...thanks im asuming 155 main but im not familiar with any of this im pretty new but from what i hear but exacts is what im looking for thanks

[Greg Z]

what are your mods on ur quad and what quad you have

god wont tell us

[cals400ex]

also, what is the temp your riding in?

i would follow the directions and go from there. if you need to do some tweeking later on that is fine. jetting is trial and error so it would be nearly impossible for exact jetting with your mods, elevation, temp, humidity, riding conditions, etc. however, someone that uses a jet kit should be able to get you in the ball park. just remember that the jets in a jet kit are not the same as keihin jets. in other words, a dynojet 150 is NOT the same as a keihin 150 mainjet.

[ewalker302]

Try both the 146 and the 155,

I run the 146, I have pipe/filter notmuch else, the 155 was way rich.

:bandit:

[adrenaline]

yea i read to start with the 146 and then just run it and adjust from there..thanx