Wanted stock 400ex stuff, swingarm, axle, bumper, shocks, exhaust and more

[416exmx]

400ex stock parts needed:
swingarm, axle, carrier, rotor holder/lock-nut, a-arms, front shocks, bumper, and stuff like that. let me know what you have WITH a price... must be in fair-good condition. serious buyer and can use paypal..

[WKY400EX]

416exmx,

I have some of the stock 400EX parts you are looking for. I know from your list above, I have the stock swingarm, axle, and bumper. Let me know if you are looking for anything else, because I have many take-off stock parts. PM me and tell me what all you are looking for, and I'll give you prices. Thanks.

[K_Fulk]

I have 2 factory locknuts, one is close to new one has been used more. Make an offer one either one I can get pics if you like.

[QuadTrix6]

I have

2002 400ex Engine $875 Shipped
Gas Tank w/ cap and petcock $39 Shipped
Case Saver $20 Shipped
Wiring harness ( Nuetral light, CDI, All battery connections etc. ALL WIRES) $50 Shipped
Airbox with lid and drain tube $27 Shipped
Air Filter with cage $15 Shipped
Engine mounts ( ALL ) $25 Shipped
Tie rod ends Make Offer
Front Hubs with good bearings Make Offer
Front Brakes (hoses, calipers,rotors) Make Offer On All Parts
Rear Linkage $60 Shipped
Battery $25 Shipped
All Stock Bolts and wires off the entire quad Make Offers On What You Need
Yellow Front Plastics Race Cut w/ Red Maier Smoothy Hood Make Offer

Pm me if interested in any Parts

[redroost85]

I have:

handlebars
plastic center cover, yellow
tank cover, yellow
chain guard, painted gloss black
swingarm skid, freshly painted Rustoluem flat black, looks new
black side panels, pair
bumper


PM me what you want, I will let them go cheap.

[pairanutz]

i have
left lower a-arm-$20
right upper a-arm-$20
complete set off stock a-arms (rode on once)-$200
one stock shock-$25
stock axle-$50
stock front bumper-$10
stock front brake lines -$15 all three rubber w/ steel line and junction block
stock rear brake line -$10
heal guards stock-$10
stock red plastic handel bar cover -$10
stock rear shock spring $25
2-stock front rims -$50
stock valves-$5
stock clutch springs-$5
stock engine skid plate- $5
stock clutch lever &parking brake assembly-$10

universal fat bar adapter kit-$25

trade for walsh plus ones?
trade for 4+1 rims ?

or make offers

i have pics of all

[unstopable1]

I have stock swingarm,exhaust,subframe,rear brake line,front bumper,air filter,plastic handle bar cover,park brake assembly,thumb throttle cover,brake resvoir cover,and a stock gas cap.Just e-mail me and let me know something.

Thanks

[660r2a400ex]

parts off a 2001 stock 400ex
I have the stock axle (pretty sure it is bent) $40 shipped
stock sprocket hub - $20 shipped
stock tool box w/ tools - $25 shipped,
stock tail light - $20 shipped
stock rear shock (I think it needs some work, maybe needs to be rebuilt) $ 45 shipped
rear tires and rims, great condition, lots of tread no dings in the rims-$110 shipped
stock heel guards - $25 shipped
stock bumper (painted blue) - $15 shipped
stock Tumb Throttle - $30 shipped
EVERYTHING IN ONE BOX to your door - $245 shipped

[660r2a400ex]

parts off a 2001 stock 400ex
I have the stock axle (pretty sure it is bent) $40 shipped
stock sprocket hub - $20 shipped
stock tool box w/ tools - $25 shipped,
stock tail light - $20 shipped
stock rear shock (I think it needs some work, maybe needs to be rebuilt) $ 45 shipped
rear tires and rims, great condition, lots of tread no dings in the rims-$110 shipped
stock heel guards - $25 shipped
stock bumper (painted blue) - $15 shipped
stock Tumb Throttle - $30 shipped
EVERYTHING IN ONE BOX to your door - $245 shipped
email me at raptorrascal660@yahoo.com

[rafalnos]

i got a pro circuit t4 if you are interested....i was thinking about polishing it so let me know...or if you want to buy polished let me know...thanks

[pnut420]

I know you said state a price, but I see you have other stuff for sale and would be wiling to trade.

I have the following though:

-Stock Swingarm(Never saw the MX track it needs new neddle bearings and does not include pivot bolt, just swingarm) Looking to get $50 for it.

-Stock carrier (needs new beraings as well, but otherwise in good shape. Make an offer.

-Stock axle (Never saw MX track either, has grass stains but otherwise in good shape) Looking to get $50 or so, not bent at all

I also have other stuff as well. I have a 2001 motor that I took the cylinder and heads off. The valves need cleaned up but seem good, but I will check to make sure it is. It has never been bored and the cylinder is not scratched, really all it needs is gaskets, piston kit, maybe a new timing chain, a cam, and head rebuild and thats it. I would be really interested in trading for your +1 swingarm if you want. Let me know.

I also have stock tailight, some wiring, stock wheels(front and rear) and like new stock front tires. I also have stock clutch perch, and other stuff, let me know what you need and I might have it.

[D11NR]

416exmx I got some stock stuff you can just have, if you want it come get it. your about an hour or two from me.

[300exOH]

I have a set of stock 400ex spindles if you're interested.