View Full Version : starter button, light, kill switch, assembly
sparks400
01-01-2004, 09:57 PM
how do u take that of and still have a start button, i heard u take the starter switch off a dirt bike but i forgot which one and i dont kno how to do it
hondaracer31
01-01-2004, 10:07 PM
I tell you what I did........Take the wires for the start button and hook them together permanantly, then get a kill switch (I use one for a Suzuki 50cc bike) and hook the wires that go to the switch on the clutch to the wires on the kill switch. You need a kill switch with 2 wires on it for this to work right. The way this works is that when you push the "killswitch" you complete the circuit for the nuetral start, with this setup it will start in gear even if you don't pull the clutch. I hope this helps you.
sparks400
01-01-2004, 10:09 PM
i kno exactlly what ur talkin about now how did u do the lights just leave the connecter off
hondaracer31
01-01-2004, 10:11 PM
mine is strictly mx so I don't have lights. I just unplugged them under the plastic.
sparks400
01-01-2004, 10:12 PM
u got any pics of it, or even how u did it
hondaracer31
01-01-2004, 10:19 PM
Sorry, no pics. No camera either. I suggest getting a shop manual and looking at the wireing(sp?) diagram. That's how I figured it out.
sparks400
01-01-2004, 10:21 PM
whered u get the switch, and how much
hondaracer31
01-01-2004, 10:26 PM
I got the switch at my local Suzuki dealer for about $12 brand new. It's just a red, push button kill switch for a jr50.
sparks400
01-01-2004, 10:27 PM
thanks alot u been a big help
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.