shaved fenders?

[member]

what should i use to shave them that wont take all day long for one side?

[ReconRider25]

saw

[Evan400ex]

I outlined the way I wanted them cut with a dry-erase marker. Then I took a dremel tool with a carbon blade and cut following the lines. Then to turn the plastic where it has been cut to the original color, use a torch.:devil:

[ridesa02400EX]

outline it with electrical tape then use a jigsaw to cut them the hardest part is getting them even

[300exOH]

Originally posted by ridesa02400EX
outline it with electrical tape then use a jigsaw to cut them the hardest part is getting them even

That's what I did. It went smooth. Just take your time. I used a file and sandpaper to clean up the edges after I got them cut the way I wanted.

[member]

ok, i already know where i want to cut them, im jsut gonna follow where the plastic kinda bends, id say it will leave 3-4 inches of the fender

[ridesa02400EX]

oh and i used sand paper and a torch to clean them up

[AtvMxRider]

Dremel

[gibson400ex]

handsaw:cool:

[howboutchaw]

Use a tin snips
They will cut the plastic just like a scissors cuts paper