wat size a-aarms help me out

[JDiablo]

i was thinkin 2+1 burgards,i no that they will be good,but how bout 3+1 or will they push to much in the corners and will slid a lil more,am i rite?but im prob goin to go wit 2+1,i jus wanna no your opinions on this thankz

[Out_Sider]

im getting +3+1 for mine..probably atleast. but im in the same debate your in because my axle bearings are starting to wear out and i want to be wide in the front and rear, so im probably going with +3 a arms and +4 axle....but not sold on the idea yet. buy both and see wat u like :p .

[4wheelboy]

it will push more in the corners with a wider rear . with a wider front u will be able to slide the rear easyer

[exman]

+3 +0 is recommended for the 300


and +1 1/2 to +2 in the rear

if you go forward in the front and extend in the rear then you are throwing the center balance off the quad, by just going plus in the back you are bringing the quad in balance.

[westcoastmxer]

im rubbin 400ex a-arms and 2(inside):3(outside)wheel offset,w/a durablue +4 eliminator axle!:devil:

[westcoastmxer]

sorry im running instead of rubbing:D

[DONKEY]

If your going to race, won't you have to run 4+1 front rims with the +3 a-arms?

[Crazy Honda]

If I where you Id go 3/1 and stay with stock wheels or 3-2but dont go 4-1 on the wheels it will tear the bars out of your hands or mabyeven do some spindle damage if you hit something like another quad or tree.not that you cant even stock but it makes the chance a lot grater.

[RIDER11X]

Originally posted by Crazy Honda
If I where you Id go 3/1 and stay with stock wheels or 3-2but dont go 4-1 on the wheels it will tear the bars out of your hands or mabyeven do some spindle damage if you hit something like another quad or tree.not that you cant even stock but it makes the chance a lot grater.

:huh 4+1 wheels are as close to the stock off set that you can get, and should work great................Stock wheels are 4+1.5 meaning 4 inches inside and 1.5 inches toward the outside because they are approx. 5.5 inches total width.
Don't go with a 2+3 offset as it makes the handling poor, and causes the effets described by Crazy Honda. 3+2 offset is not much better.:cool: