PDA

View Full Version : Where am I?



knighttime
02-19-2002, 12:01 PM
This is what I have in a box. A 39 tooth and a 15 tooth sprocket. Is this stock? What is stock? What am I running right now?:huh

Blysster
02-19-2002, 12:15 PM
15/38 is stock. You won't notice any difference compared to stock with your 15/39, if you do it's going to be very small.

knighttime
02-19-2002, 12:22 PM
:cool:

02-19-2002, 12:34 PM
Were did this so called box come from????

knighttime
02-19-2002, 01:09 PM
I can't really get into where I got this box. It was given to me by an old prophet. He told me to hold on to it.:eek:

knighttime
02-19-2002, 01:12 PM
This box holds a 15 tooth and a 39 tooth sprocket. These are the sprockets I DON'T have on the quad.

So I am currently running a 38 tooth rear. What sprocket is on the front? (Remember, the 15 tooth is in the box.) Maybe I have to count the teeth on the installed front.:confused:

MOFO
02-19-2002, 01:58 PM
Mike,


You are running a 14tooth front sprocket on the front....

knighttime
02-19-2002, 02:01 PM
I have a 14 tooth and a 38 tooth. What is this set up for?

MOFO
02-19-2002, 02:04 PM
The change in the front sprocket brought down your gear ratio (setup for low end and not top speed)...but since you have 22" tires in the back, I think that will bring it back....close to stock ratio's.....

knighttime
02-19-2002, 02:06 PM
no i am home!:D