dual stock oil cooler setup done-

[speedy400]

Well I got a 2nd stock oil cooler with the stock lines in the mail a few days ago, got 3 ft of some more 3/4 I think it was oil line and got the oil cooler mounted with 2 simple brackets I made(the stock brackets bent straight). Took off the stock flange's (the ones from the line to the cooler, only the lines that I got in the mail.). Hooked up the lines from the stock oil rezzy, to the motor(stock) then from the motor to the 2nd cooler, then the stock oil cooler, then from the stock oil cooler back to the oil tank(also stock). I used 6 hose clamps to make the connections. It was very easy, only took maybe a total of 2 1/2 hours to make/hook everything up.Then I got more oil in, started it up for 5 min, checked all connections for leaks, turned it off and added oil accordingly. I have 6 pics on the bottom of my gallery.-

http://community.webshots.com/album/97266119iVWtqL

BTW its very sturdy-darren

[K_Fulk]

Nice wirk , its good to see some people can come up with an idea and make it work.Probly hard to tell how it works right now with it being winter and minnesota right now.

[speedy400]

thanks, very true, but the Ice radar runs are coming up real soon, I should be able to see a little diffrence there...-darren

[6858-400ex]

can i just replace the oversized with the stock one

what fittings did u use

[Cody_300ex]

check the date dude