Tether Switch Help!

[Out_Sider]

i searched and searched and cant find chit. And i need help installing this thing! i have the white and black wires...now what do i do?

[Out_Sider]

funking bump :mad:

[Out_Sider]

well now something in the electrical system is messed up.....it wont start at all.... :mad: :mad: :mad: :mad: :mad: :mad: :mad: :mad: :mad:

[4wheelboy]

u probally blew a fuse. im not sure but i think the longer wire goes to the positive coil and the other goes to ground

[4wheelboy]

( copy and pasted from a search)

;) Take off the black panel on the clutch side of the bike.
The coil is right there. Take off the coil and one of the wires already has a waterproof connection. Take it apart and splice your long wire onto that. Then take your ground and attach it to the bolt that the coil is connected too.


hope it helps dude

[RAPTORAZ]

I wired my Pro Design kill switch to the Blue/Yellow stripe wire on the rev box.

[flying400ex]

get your manual and look at the wiring diagram and find the wire that runs of off the kill switch i think its like brown and green or somthing but I just found that wire along the frame and i spliced the wires together and i grounded it to the fender bracket.

[Chanman420q]

Originally posted by RAPTORAZ
I wired my Pro Design kill switch to the Blue/Yellow stripe wire on the rev box.

ditto

[Taco]

Originally posted by RAPTORAZ
I wired my Pro Design kill switch to the Blue/Yellow stripe wire on the rev box. Same here

[stonerider250x]

on darrell's kill switch both the wires are the same lenth. One is black one is white. Which one is which? he is over at my house right now and we dont want to screw nothing up. We were gonna just put the black one on the Coil, and the white one to a ground, but we dont if thats right or not.