moving key and lights

[bhuggz]

I've seen some great pics out there where some people have moves there key switch and lights to their plastics. Does anyone have any suggestions on the best way to do that? Any help is greatly appreciated.:confused:

[Cole Trane]

Drill out the holes to mount the lights and just relocate the lights where you want them

[bhuggz]

its just that easy...huh? Is there any disconecting or anything that holds them in place? I don't have my bike so I can't see to know but when I get back to pa. I want to know ahead of time what I need!

[Cole Trane]

It should be that simple, as long as you don't mess up the wiring or anything. Good Luck!!:D

[bhuggz]

thanks! I appreciate it!

[jshtex]

The keyswitch has a tab on the back side that needs to be pushed in then it comes out the top. For the neutral light just pull the plastic part out of the top and then the rubber part that is left will come out the bottom.

[batgeek]

if you want, buy some sealed quick disconnect connectors male and female sides and cut/crimp your original wiring to them. that way when you take off yer plastics, you wont have to remove the rubber boot light housing from the plastic in order to get the plastics off :D