muff
12-13-2003, 07:07 AM
This is off a 2001 400ex, bored to a 426
I just put a new wiesco 426cc 11:1 comp. piston in there, you'll need to break it in, it will also have a brand new hot cams stage 2, brand new FDO heavy duty studs, brand new valve seals and the valves have just been seated and adjusted, the head was just silicone bead blasted and is spotless as you can see in the pictures. I can also include the stock wire harness if you want it.
I purchased this motor in the beginning of the summer, used it one race, then the head gasket started to slowly leak so I pulled it apart, bought the new parts, and haven't used it since.
I am selling because I bought a Baldwin 440 motor
I want to get $1000 +shipping, firm on that price, by the time of sale the motor will all be put back together
http://www.imagestation.com/picture/sraid89/p7141c51e89eac854ff563c51b56f2400/fa825711.jpg
http://www.imagestation.com/picture/sraid89/p064cca92d219cca44716568811e14010/fa825729.jpg
http://www.imagestation.com/picture/sraid87/p297d8d97c0d18159cb3b3f094c6faa84/fa9c83ab.jpg
polished intake
http://www.imagestation.com/picture/sraid92/p8c76b7b731ab1cdb302c6e4c675b6487/fa59ab5f.jpg
valves
http://www.imagestation.com/picture/sraid92/pe1aee448ab773c1584204d83396d1e2f/fa59ab64.jpg
valves other side
http://www.imagestation.com/picture/sraid92/p853744a43a52a0bfb3a88669ef1aa769/fa59ab68.jpg
polished top piece
http://www.imagestation.com/picture/sraid92/p3a03d2c44f083ffc8567af23352e3783/fa59ab6a.jpg
Here's a pic before I took the motor out
http://www.imagestation.com/picture/sraid79/p283d3cb7ebfd924a21925a17a43e4a9c/fb1363a1.jpg
I just put a new wiesco 426cc 11:1 comp. piston in there, you'll need to break it in, it will also have a brand new hot cams stage 2, brand new FDO heavy duty studs, brand new valve seals and the valves have just been seated and adjusted, the head was just silicone bead blasted and is spotless as you can see in the pictures. I can also include the stock wire harness if you want it.
I purchased this motor in the beginning of the summer, used it one race, then the head gasket started to slowly leak so I pulled it apart, bought the new parts, and haven't used it since.
I am selling because I bought a Baldwin 440 motor
I want to get $1000 +shipping, firm on that price, by the time of sale the motor will all be put back together
http://www.imagestation.com/picture/sraid89/p7141c51e89eac854ff563c51b56f2400/fa825711.jpg
http://www.imagestation.com/picture/sraid89/p064cca92d219cca44716568811e14010/fa825729.jpg
http://www.imagestation.com/picture/sraid87/p297d8d97c0d18159cb3b3f094c6faa84/fa9c83ab.jpg
polished intake
http://www.imagestation.com/picture/sraid92/p8c76b7b731ab1cdb302c6e4c675b6487/fa59ab5f.jpg
valves
http://www.imagestation.com/picture/sraid92/pe1aee448ab773c1584204d83396d1e2f/fa59ab64.jpg
valves other side
http://www.imagestation.com/picture/sraid92/p853744a43a52a0bfb3a88669ef1aa769/fa59ab68.jpg
polished top piece
http://www.imagestation.com/picture/sraid92/p3a03d2c44f083ffc8567af23352e3783/fa59ab6a.jpg
Here's a pic before I took the motor out
http://www.imagestation.com/picture/sraid79/p283d3cb7ebfd924a21925a17a43e4a9c/fb1363a1.jpg