kicker696
12-07-2003, 04:45 PM
I am selling this because i have bought a 416ex and need to get rid of this to pay for it. I have 2 different motors that could go with it. The first is:
86 250r that will need a left case and new crank bearings, also, one of the teeth is half way chipped off on the main kicker gear but does not afftect the motor, that is all. the cylinder is in great condition, it is ported and polished, with a good piston and good crank. THE MOTOR IS ALREADY APART. just needs the case, bearings, and if you wanted that gear, and to be put back together and would be a great runner!
The second engine is:
86 265r
Motor
-265
-Port and polish
-V-force reed cag
-V-force reeds
-Hinson clutch basket
-New clutch plates
-Pro-design Cool head
-gears have all been gone through and looked at
-polished stator cover
-FMF Pipe and silencer
-New stator
-Janssen racing coil
-New CDI
-New bearings
The only thing the chassis needs is a-arms and shocks, i don't have either so i can't include any.
Chassis
-Frame is perfectly straight no cracks or welds
-Lonestar axle
-DID chain
-TAG T2 handle bars
-Blue Maier plastic all around
-Blue CEET seat
-New bearings all around
-double wide foot pegs
-+2 steel braided brake lines
-AC grab bar
sure there is other stuff i am forgetting
Extras
-2 swing arm skid plates
-stock axle
-numerous extra cables
-blue hand guards
-top LNZ racing a-arms
-stock shockwears
-extra stator
-numerous gaskets
-moose aluminum bars
-stock handle bar clamps
couple other things also
I will sell it with the first motor for 2100, or the 2nd for 2800, or if you wanted, i will sell it with both motors for 3150. If you are interested let me know.
One other thing, if there is somthing that you don't want on the bike, i can also remove that and lower the price alittle if you want
86 250r that will need a left case and new crank bearings, also, one of the teeth is half way chipped off on the main kicker gear but does not afftect the motor, that is all. the cylinder is in great condition, it is ported and polished, with a good piston and good crank. THE MOTOR IS ALREADY APART. just needs the case, bearings, and if you wanted that gear, and to be put back together and would be a great runner!
The second engine is:
86 265r
Motor
-265
-Port and polish
-V-force reed cag
-V-force reeds
-Hinson clutch basket
-New clutch plates
-Pro-design Cool head
-gears have all been gone through and looked at
-polished stator cover
-FMF Pipe and silencer
-New stator
-Janssen racing coil
-New CDI
-New bearings
The only thing the chassis needs is a-arms and shocks, i don't have either so i can't include any.
Chassis
-Frame is perfectly straight no cracks or welds
-Lonestar axle
-DID chain
-TAG T2 handle bars
-Blue Maier plastic all around
-Blue CEET seat
-New bearings all around
-double wide foot pegs
-+2 steel braided brake lines
-AC grab bar
sure there is other stuff i am forgetting
Extras
-2 swing arm skid plates
-stock axle
-numerous extra cables
-blue hand guards
-top LNZ racing a-arms
-stock shockwears
-extra stator
-numerous gaskets
-moose aluminum bars
-stock handle bar clamps
couple other things also
I will sell it with the first motor for 2100, or the 2nd for 2800, or if you wanted, i will sell it with both motors for 3150. If you are interested let me know.
One other thing, if there is somthing that you don't want on the bike, i can also remove that and lower the price alittle if you want