Parting out the 460EX w/ some 250R parts

[propartsracing]

Here's a list of stuff I'm parting out from my 460EX. Please e-mail me @ trish70@patmedia.net if you're interested. Everything is in very good condition & all is for 400EX unless otherwise noted. All items will be sold on a first come-first serve basis.

Thanks! Mike Krachun

===========================================

Baldwin Front Hubs w/ DP rotors: $275

Roll Design XC A-Arms w/ JRD billet spindals, billet line holder & new bushings & pins: $1200

AXIS Front Shocks: $850

PRM Belly Pan: $50

NEW DP Front 250R Rotors: $130 set
NEW DP 400EX Rotors (2): $70 each

NEW Zing non-skid seat covers (1): $30 each

Baldwin bars clamp holder w/ kill switch: $30

Stock 250R gas take blue w/ black Quadtech cover: $50

spindals (set): $50

Graydon Belly Pan: $25

Electrical System w/ Rev Box: $50

Graydon bumper: $25


BRAND NEW RPM +1 - +3 Dominator Axle: $450

[400ex_backer]

is the graydon bumper for a 400ex?

[propartsracing]

yes, all parts (unless noted with a 250R in front of them) are for the 400EX.

[400ex_backer]

can you send a pic of it to nateandamy2002@yahoo.com
very interested

[remlapr]

I'm very interested in the LRD. Can you e-mail me pics to ryandpalmer@yahoo.com. Is it the old style or the new Pro 4?

[416exmx]

i need a rear rotor and the 4 bolts holding it on, the rear rotor hub deal and the axle lock-nut(parts replaced by antifade, and stock rear shock, all for 400ex...got anything like that???

[pairanutz]

pmed you on gpr and seat cover

[propartsracing]

Originally posted by 416exmx
i need a rear rotor and the 4 bolts holding it on, the rear rotor hub deal and the axle lock-nut(parts replaced by antifade, and stock rear shock, all for 400ex...got anything like that???


I have an RPM antifade w/ a DP rotor on it for $150.

[EX Stud]

Can i get a pic of the following parts:

PRM Belly Pan
Baldwin bars clamp holder w/ kill switch
LRD Pipe

ThankS

[Brad]

hey, i need pics of the fcr and the mm rating, and pics of the lrd...please

[propartsracing]

Hi,

If anyone is going to ask me to send them pictures, please include your e-mail address in your post.

Thanks!

Trish

[Brad]

Originally posted by propartsracing
Hi,

If anyone is going to ask me to send them pictures, please include your e-mail address in your post.

Thanks!

Trish

sorry i pmed it to you

[Xowner]

pics of the Graydon bumper jpsshack@fuse.net

Thanks

[Brad]

yeah can i also see pics of the zing seat covers and the baldwin bar clamp holder and kill switch?

[Holeshot36]

pics of the fcr carb and mm it is holeshot36@aol.com

[h01400ex]

Het man,
Do you still have the lrd pipe? Is it a slip on or the full pipe?

[EX Stud]

Sorry man! Jefferybass@hotmail.com

PRM Belly Pan
Baldwin bars clamp holder w/ kill switch
LRD Pipe

[propartsracing]

Originally posted by h01400ex
Het man,
Do you still have the lrd pipe? Is it a slip on or the full pipe?

LRD doesn't make a slip on. It's the full system from this year.

Thx,
Trish

[propartsracing]

Hi,

I've updated the original post with items that have sold or are on hold.

Thx,
Trish

[EX Stud]

is the clamp for oversized bars? Such as pro-taper

[Brad]

arite could u pm me your address? ill take the seat cover and the clamp w/ killswitch. what does the clamp do? i already have a oversized mount kit for my protapers

[f1502nv]

pcan you send me a pic of the carb and its mm size please at.........f1502nv@comcast.net

[propartsracing]

Originally posted by EX Stud
is the clamp for oversized bars? Such as pro-taper

Yes.

[propartsracing]

THE CARB IS A 39MM FCR CARB.

[One_Bad_400]

how much for the carb?

[f1502nv]

check your pm

[propartsracing]

.

[quadnice]

Mike/Trish
Interested in the FCR here!
Thanks Jerry!

[NikNacs67]

Is the revbox stock or aftermarket and what all comes with the electrical system?

[propartsracing]

It's an LRD rev-box. It comes with the wiring harness & rev box.

[f1502nv]

check your pm thanx

[KASCHAK]

gradon bumper

kash@intergrafix.net

[propartsracing]

bump.... I still have items left, make me a REASONABLE offer & it's yours.

[propartsracing]

I've updated the original post with the items I have remaining. Please pm me if you're interested or e-mail me @ trish70@patmedia.net

[Mxbubs]

$215 shipped for the hubs. HAVE THEN MONEY. Let me know.

Thanks, Mxbubs