PDA

View Full Version : How do you remove the...


QuadTrix6
11-28-2003, 07:03 PM
Hey I am taking the wiring harness off my engine and the engine out of the frame and have a couple of questions. How do you get the wires that connect into the engine out? One goes into the left sidecase and one goes to the starter I think. Do they just pull out or do they have to stay in? Thanks
2004TRX450R
11-28-2003, 08:54 PM
Just unplug them from the frame wire harness. Don't bother takeing them out of the engine. You do have to disconnect the starter wire from the starter but the rest you just unplug.
Jpoutlaw250R
11-28-2003, 09:33 PM
Yea just follow the wire from the engine back to the plug and unplug it. later
stupid driver
11-28-2003, 09:37 PM
yep, just unplug them. Make sure you have a service manual handy just in case. And be sure to keep all the bolts and stuff organized, it is pretty easy to lose one of them suckers.
QuadTrix6
11-29-2003, 04:59 AM
ok so just leave them attached to the engine and disconnect them from the wire harness? Thanks
stupid driver
11-29-2003, 10:09 AM
i disconnected the wire that goes to the starter, on the starter. THere is a bolt that you unscrew to take this wire off. The other one, which goes to the left crankcase cover, i took off at the wire harness.
2004TRX450R
11-29-2003, 01:16 PM
another tip for keeping stuf organized is to put the bolts back in the holes they came out of after you take stuff apart. That way you know exactly where they all go.
muff
11-29-2003, 01:21 PM
Originally posted by QuadTrix6
ok so just leave them attached to the engine and disconnect them from the wire harness? Thanks

correct

the wire that runs into the left side of the engine is connected to the stator...the wire that runs to the starter can be taken off by removing the nut
QuadTrix6
11-29-2003, 04:08 PM
Ok Thanks a lot guys. Yea taking the whole bike apart can get real crazy. I have about 50 ziplock bags with all the bolts labeled. Any one need any bolts? I got em all :blah:
muff
11-29-2003, 04:13 PM
how about you send me all of the bolts for free for helpin you out up there ^^ lol
4wheelboy
11-29-2003, 10:15 PM
Originally posted by QuadTrix6
Ok Thanks a lot guys. Yea taking the whole bike apart can get real crazy. I have about 50 ziplock bags with all the bolts labeled. Any one need any bolts? I got em all :blah:

lol i need some exaust bolts mine are always rattling out:p