250x and 350x mounts

[kicker696]

i need to know if the 250x and 350x mounts are the same, reason i ask, is i am planning on putting a 250x motor in a 250r frame and have found a frame that is already set up for a 350x, will the 250x motor bolt right in with no mods?

[kicker696]

bump

[Diedrich]

it could fit and it may not..but if it dont it wont be by much and shouldnt take much modding to fix

[kicker696]

yeh, i know that it won't be hard to fabricate the mounts, i work at a metals shop, but the less work i have to do the better

[kicker696]

bump

[wilkin250r]

I know they are pretty similar. You've probably heard of the 250x/350x converstion, I can't imagine it's all that difficult to go the other direction.

[Diedrich]

on the 350x to a 250x u cut a piece of the motor mount off of the motor..its to line up the mounts so i dont know if they'll all line up or not..probably not unless it was set-up to cut the mount off of the motor..but if it wasnt then it still shouldnt be hard to fix

[bradley300]

im pretty sure, when using a 300ex frame, there is one mount on the right side you have to shave. so its not that hard.